o != arg0 is the same as !(o == (arg0)).
o != arg0 is the same as !(o == (arg0)).
the object to compare against this object for dis-equality.
false if the receiver object is equivalent to the argument; true otherwise.
o == arg0 is the same as if (o eq null) arg0 eq null else o.equals(arg0).
o == arg0 is the same as if (o eq null) arg0 eq null else o.equals(arg0).
the object to compare against this object for equality.
true if the receiver object is equivalent to the argument; false otherwise.
o == arg0 is the same as o.equals(arg0).
o == arg0 is the same as o.equals(arg0).
the object to compare against this object for equality.
true if the receiver object is equivalent to the argument; false otherwise.
Invoked to report an event that subclasses may wish to report in some way to the user.
Invoked to report an event that subclasses may wish to report in some way to the user.
the event being reported
This method is used to cast the receiver object to be of type T0.
This method is used to cast the receiver object to be of type T0.
Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression1.asInstanceOf[String] will throw a ClassCastException at runtime, while the expressionList(1).asInstanceOf[List[String]] will not. In the latter example, because the type argument is erased as
part of compilation it is not possible to check whether the contents of the list are of the requested typed.
the receiver object.
This method creates and returns a copy of the receiver object.
This method creates and returns a copy of the receiver object.
The default implementation of the clone method is platform dependent.
a copy of the receiver object.
This method is used to test whether the argument (arg0) is a reference to the
receiver object (this).
This method is used to test whether the argument (arg0) is a reference to the
receiver object (this).
The eq method implements an [http://en.wikipedia.org/wiki/Equivalence_relation equivalence relation] on
non-null instances of AnyRef:
* It is reflexive: for any non-null instance x of type AnyRef, x.eq(x) returns true.
* It is symmetric: for any non-null instances x and y of type AnyRef, x.eq(y) returns true if and
only if y.eq(x) returns true.
* It is transitive: for any non-null instances x, y, and z of type AnyRef if x.eq(y) returns true and y.eq(z) returns true, then x.eq(z) returns true.
Additionally, the eq method has three other properties.
* It is consistent: for any non-null instances x and y of type AnyRef, multiple invocations of
x.eq(y) consistently returns true or consistently returns false.
* For any non-null instance x of type AnyRef, x.eq(null) and null.eq(x) returns false.
* null.eq(null) returns true.
When overriding the equals or hashCode methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they
should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).
the object to compare against this object for reference equality.
true if the argument is a reference to the receiver object; false otherwise.
This method is used to compare the receiver object (this) with the argument object (arg0) for equivalence.
This method is used to compare the receiver object (this) with the argument object (arg0) for equivalence.
The default implementations of this method is an [http://en.wikipedia.org/wiki/Equivalence_relation equivalence
relation]:
* It is reflexive: for any instance x of type Any, x.equals(x) should return true.
* It is symmetric: for any instances x and y of type Any, x.equals(y) should return true if and
only if y.equals(x) returns true.
* It is transitive: for any instances x, y, and z of type AnyRef if x.equals(y) returns true and
y.equals(z) returns true, then x.equals(z) should return true.
If you override this method, you should verify that your implementation remains an equivalence relation.
Additionally, when overriding this method it is often necessary to override hashCode to ensure that objects
that are "equal" (o1.equals(o2) returns true) hash to the same
scala.Int
(o1.hashCode.equals(o2.hashCode)).
the object to compare against this object for equality.
true if the receiver object is equivalent to the argument; false otherwise.
This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object.
This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object.
The details of when and if the finalize method are invoked, as well as the interaction between finalizeand non-local returns and exceptions, are all platform dependent.
Returns a representation that corresponds to the dynamic class of the receiver object.
Returns a representation that corresponds to the dynamic class of the receiver object.
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object.
Returns a hash code value for the object.
Returns a hash code value for the object.
The default hashing algorithm is platform dependent.
Note that it is allowed for two objects to have identical hash codes (o1.hashCode.equals(o2.hashCode)) yet
not be equal (o1.equals(o2) returns false). A degenerate implementation could always return 0.
However, it is required that if two objects are equal (o1.equals(o2) returns true) that they have
identical hash codes (o1.hashCode.equals(o2.hashCode)). Therefore, when overriding this method, be sure
to verify that the behavior is consistent with the equals method.
the hash code value for the object.
This method is used to test whether the dynamic type of the receiver object is T0.
This method is used to test whether the dynamic type of the receiver object is T0.
Note that the test result of the test is modulo Scala's erasure semantics. Therefore the expression1.isInstanceOf[String] will return false, while the expression List(1).isInstanceOf[List[String]] will
return true. In the latter example, because the type argument is erased as part of compilation it is not
possible to check whether the contents of the list are of the requested typed.
true if the receiver object is an instance of erasure of type T0; false otherwise.
o.ne(arg0) is the same as !(o.eq(arg0)).
o.ne(arg0) is the same as !(o.eq(arg0)).
the object to compare against this object for reference dis-equality.
false if the argument is not a reference to the receiver object; true otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
Returns a string representation of the object.
Returns a string representation of the object.
The default representation is platform dependent.
a string representation of the object.
Trait whose instances collect the results of a running suite of tests and presents those results in some way to the user. Instances of this trait can be called "report functions" or "reporters."
Reporters receive test results via thirteen events. Each event is fired to pass a particular kind of information to the reporter. The events are:
RunStartingTestStartingTestSucceededTestFailedTestIgnoredTestPendingSuiteStartingSuiteCompletedSuiteAbortedInfoProvidedRunStoppedRunAbortedRunCompletedReporters may be implemented such that they only present some of the reported events to the user. For example, you could define a reporter class that doesn nothing in response to
SuiteStartingevents. Such a class would always ignoreSuiteStartingevents.The term test as used in the
TestStarting,TestSucceeded, andTestFailedevent names is defined abstractly to enable a wide range of test implementations. TraitSuitefiresTestStartingto indicate it is about to invoke one of its test methods,TestSucceededto indicate a test method returned normally, andTestFailedto indicate a test method completed abruptly with an exception. Although the execution of aSuite's test methods will likely be a common event reported via theTestStarting,TestSucceeded, andTestFailedmethods, because of the abstract definition of “test” used by the the event classes, these events are not limited to this use. Information about any conceptual test may be reported via theTestStarting,TestSucceeded, andTestFailedevents.Likewise, the term suite as used in the
SuiteStarting,SuiteAborted, andSuiteCompletedevent names is defined abstractly to enable a wide range of suite implementations. ObjectRunnerfiresSuiteStartingto indicate it is about to invokerunon aSuite,SuiteCompletedto indicate aSuite'srunmethod returned normally, andSuiteAbortedto indicate aSuite'srunmethod completed abruptly with an exception. Similarly, classSuitefiresSuiteStartingto indicate it is about to invokerunon a nestedSuite,SuiteCompletedto indicate a nestedSuite'srunmethod returned normally, andSuiteAbortedto indicate a nestedSuite'srunmethod completed abruptly with an exception. Although the execution of aSuite'srunmethod will likely be a common event reported via theSuiteStarting,SuiteAborted, andSuiteCompletedevents, because of the abstract definition of "suite" used by the event classes, these events are not limited to this use. Information about any conceptual suite may be reported via theSuiteStarting,SuiteAborted, andSuiteCompletedevents.Extensibility
You can create classes that extend
ReportFunctionto report test results in custom ways, and to report custom information passed as an event "payload." For more information on the latter use case, see the Extensibility section of theEventdocumentation.Reporter classes can handle events in any manner, including doing nothing. For convenience, trait
ReporterFunctionincludes a default implentation ofapplythat does nothing.authors:
Bill Venners