Class used via an implicit conversion to enable any two objects to be compared with
===
in assertions in tests.
The type of the fixture parameter that can be passed into tests in this suite.
The type of the fixture parameter that can be passed into tests in this suite.
A test function taking no arguments, which also provides a test name and config map.
Trait whose instances encapsulate a test function that takes a fixture and config map.
Run the passed test function with a fixture created by this method.
Run the passed test function with a fixture created by this method.
This method should create the fixture object needed by the tests of the current suite, invoke the test function (passing in the fixture object), and if needed, perform any clean up needed after the test completes. For more detail and examples, see the main documentation for this trait.
Assert that an Option[String]
is None
.
Assert that an Option[String]
is None
.
If the condition is None
, this method returns normally.
Else, it throws TestFailedException
with the String
value of the Some
included in the TestFailedException
's
detail message.
This form of assert
is usually called in conjunction with an
implicit conversion to Equalizer
, using a ===
comparison, as in:
assert(a === b)
For more information on how this mechanism works, see the documentation for
Equalizer
.
the Option[String]
to assert
Assert that an Option[String]
is None
.
Assert that an Option[String]
is None
.
If the condition is None
, this method returns normally.
Else, it throws TestFailedException
with the String
value of the Some
, as well as the
String
obtained by invoking toString
on the
specified message
,
included in the TestFailedException
's detail message.
This form of assert
is usually called in conjunction with an
implicit conversion to Equalizer
, using a ===
comparison, as in:
assert(a === b, "extra info reported if assertion fails")
For more information on how this mechanism works, see the documentation for
Equalizer
.
the Option[String]
to assert
An objects whose toString
method returns a message to include in a failure report.
Assert that a boolean condition, described in String
message
, is true.
Assert that a boolean condition, described in String
message
, is true.
If the condition is true
, this method returns normally.
Else, it throws TestFailedException
with the
String
obtained by invoking toString
on the
specified message
as the exception's detail message.
the boolean condition to assert
An objects whose toString
method returns a message to include in a failure report.
Assert that a boolean condition is true.
Assert that a boolean condition is true.
If the condition is true
, this method returns normally.
Else, it throws TestFailedException
.
the boolean condition to assert
Implicit conversion from Any
to Equalizer
, used to enable
assertions with ===
comparisons.
Implicit conversion from Any
to Equalizer
, used to enable
assertions with ===
comparisons.
For more information on this mechanism, see the documentation for Equalizer.
Because trait Suite
mixes in Assertions
, this implicit conversion will always be
available by default in ScalaTest Suite
s. This is the only implicit conversion that is in scope by default in every
ScalaTest Suite
. Other implicit conversions offered by ScalaTest, such as those that support the matchers DSL
or invokePrivate
, must be explicitly invited into your test code, either by mixing in a trait or importing the
members of its companion object. The reason ScalaTest requires you to invite in implicit conversions (with the exception of the
implicit conversion for ===
operator) is because if one of ScalaTest's implicit conversions clashes with an
implicit conversion used in the code you are trying to test, your program won't compile. Thus there is a chance that if you
are ever trying to use a library or test some code that also offers an implicit conversion involving a ===
operator,
you could run into the problem of a compiler error due to an ambiguous implicit conversion. If that happens, you can turn off
the implicit conversion offered by this convertToEqualizer
method simply by overriding the method in your
Suite
subclass, but not marking it as implicit:
// In your Suite subclass override def convertToEqualizer(left: Any) = new Equalizer(left)
the object whose type to convert to Equalizer
.
Executes one or more tests in this Suite
, printing results to the standard output.
Executes one or more tests in this Suite
, printing results to the standard output.
This method invokes run
on itself, passing in values that can be configured via the parameters to this
method, all of which have default values. This behavior is convenient when working with ScalaTest in the Scala interpreter.
Here's a summary of this method's parameters and how you can use them:
The testName
parameter
If you leave testName
at its default value (of null
), this method will pass None
to
the testName
parameter of run
, and as a result all the tests in this suite will be executed. If you
specify a testName
, this method will pass Some(testName)
to run
, and only that test
will be run. Thus to run all tests in a suite from the Scala interpreter, you can write:
scala> (new ExampleSuite).execute()
To run just the test named "my favorite test"
in a suite from the Scala interpreter, you would write:
scala> (new ExampleSuite).execute("my favorite test")
Or:
scala> (new ExampleSuite).execute(testName = "my favorite test")
The configMap
parameter
If you provide a value for the configMap
parameter, this method will pass it to run
. If not, the default value
of an empty Map
will be passed. For more information on how to use a config map to configure your test suites, see
the config map section in the main documentation for this trait. Here's an example in which you configure
a run with the name of an input file:
scala> (new ExampleSuite).execute(configMap = Map("inputFileName" -> "in.txt")
The color
parameter
If you leave the color
parameter unspecified, this method will configure the reporter it passes to run
to print
to the standard output in color (via ansi escape characters). If you don't want color output, specify false for color
, like this:
scala> (new ExampleSuite).execute(color = false)
The durations
parameter
If you leave the durations
parameter unspecified, this method will configure the reporter it passes to run
to
not print durations for tests and suites to the standard output. If you want durations printed, specify true for durations
,
like this:
scala> (new ExampleSuite).execute(durations = true)
The shortstacks
and fullstacks
parameters
If you leave both the shortstacks
and fullstacks
parameters unspecified, this method will configure the reporter
it passes to run
to not print stack traces for failed tests if it has a stack depth that identifies the offending
line of test code. If you prefer a short stack trace (10 to 15 stack frames) to be printed with any test failure, specify true for
shortstacks
:
scala> (new ExampleSuite).execute(shortstacks = true)
For full stack traces, set fullstacks
to true:
scala> (new ExampleSuite).execute(fullstacks = true)
If you specify true for both shortstacks
and fullstacks
, you'll get full stack traces.
The stats
parameter
If you leave the stats
parameter unspecified, this method will not fire RunStarting
and either RunCompleted
or RunAborted
events to the reporter it passes to run
.
If you specify true for stats
, this method will fire the run events to the reporter, and the reporter will print the
expected test count before the run, and various statistics after, including the number of suites completed and number of tests that
succeeded, failed, were ignored or marked pending. Here's how you get the stats:
scala> (new ExampleSuite).execute(stats = true)
To summarize, this method will pass to run
:
testName
- None
if this method's testName
parameter is left at its default value of null
, else Some(testName)
.reporter
- a reporter that prints to the standard outputstopper
- a Stopper
whose apply
method always returns false
filter
- a Filter
constructed with None
for tagsToInclude
and Set()
for tagsToExclude
configMap
- the configMap
passed to this methoddistributor
- None
tracker
- a new Tracker
Note: In ScalaTest, the terms "execute" and "run" basically mean the same thing and
can be used interchangably. The reason this method isn't named run
is that it takes advantage of
default arguments, and you can't mix overloaded methods and default arguments in Scala. (If named run
,
this method would have the same name but different arguments than the main run
method that
takes seven arguments. Thus it would overload and couldn't be used with default argument values.)
Design note: This method has two "features" that may seem unidiomatic. First, the default value of testName
is null
.
Normally in Scala the type of testName
would be Option[String]
and the default value would
be None
, as it is in this trait's run
method. The null
value is used here for two reasons. First, in
ScalaTest 1.5, execute
was changed from four overloaded methods to one method with default values, taking advantage of
the default and named parameters feature introduced in Scala 2.8.
To not break existing source code, testName
needed to have type String
, as it did in two of the overloaded
execute
methods prior to 1.5. The other reason is that execute
has always been designed to be called primarily
from an interpeter environment, such as the Scala REPL (Read-Evaluate-Print-Loop). In an interpreter environment, minimizing keystrokes is king.
A String
type with a null
default value lets users type suite.execute("my test name")
rather than
suite.execute(Some("my test name"))
, saving several keystrokes.
The second non-idiomatic feature is that shortstacks
and fullstacks
are all lower case rather than
camel case. This is done to be consistent with the Shell
, which also uses those forms. The reason
lower case is used in the Shell
is to save keystrokes in an interpreter environment. Most Unix commands, for
example, are all lower case, making them easier and quicker to type. In the ScalaTest
Shell
, methods like shortstacks
, fullstacks
, and nostats
, etc., are
designed to be all lower case so they feel more like shell commands than methods.
the name of one test to run.
a Map
of key-value pairs that can be used by the executing Suite
of tests.
a boolean that configures whether output is printed in color
a boolean that configures whether test and suite durations are printed to the standard output
a boolean that configures whether short stack traces should be printed for test failures
a boolean that configures whether full stack traces should be printed for test failures
a boolean that configures whether test and suite statistics are printed to the standard output
Expect that the value passed as expected
equals the value passed as actual
.
Expect that the value passed as expected
equals the value passed as actual
.
If the actual
value equals the expected
value
(as determined by ==
), expect
returns
normally. Else, expect
throws an
TestFailedException
whose detail message includes the expected and actual values.
the expected value
the actual value, which should equal the passed expected
value
Expect that the value passed as expected
equals the value passed as actual
.
Expect that the value passed as expected
equals the value passed as actual
.
If the actual
equals the expected
(as determined by ==
), expect
returns
normally. Else, if actual
is not equal to expected
, expect
throws an
TestFailedException
whose detail message includes the expected and actual values, as well as the String
obtained by invoking toString
on the passed message
.
the expected value
An object whose toString
method returns a message to include in a failure report.
the actual value, which should equal the passed expected
value
The total number of tests that are expected to run when this Suite
's run
method is invoked.
The total number of tests that are expected to run when this Suite
's run
method is invoked.
This trait's implementation of this method returns the sum of:
testNames
List
, minus the number of tests marked as ignoredexpectedTestCount
on every nested Suite
contained in
nestedSuites
a Filter
with which to filter tests to count based on their tags
Throws TestFailedException
, with the passed
Throwable
cause, to indicate a test failed.
Throws TestFailedException
, with the passed
Throwable
cause, to indicate a test failed.
The getMessage
method of the thrown TestFailedException
will return cause.toString()
.
a Throwable
that indicates the cause of the failure.
Throws TestFailedException
, with the passed
String
message
as the exception's detail
message and Throwable
cause, to indicate a test failed.
Throws TestFailedException
, with the passed
String
message
as the exception's detail
message and Throwable
cause, to indicate a test failed.
A message describing the failure.
A Throwable
that indicates the cause of the failure.
Throws TestFailedException
, with the passed
String
message
as the exception's detail
message, to indicate a test failed.
Throws TestFailedException
, with the passed
String
message
as the exception's detail
message, to indicate a test failed.
A message describing the failure.
Throws TestFailedException
to indicate a test failed.
Throws TestFailedException
to indicate a test failed.
Intercept and return an exception that's expected to be thrown by the passed function value.
Intercept and return an exception that's expected to
be thrown by the passed function value. The thrown exception must be an instance of the
type specified by the type parameter of this method. This method invokes the passed
function. If the function throws an exception that's an instance of the specified type,
this method returns that exception. Else, whether the passed function returns normally
or completes abruptly with a different exception, this method throws TestFailedException
.
Note that the type specified as this method's type parameter may represent any subtype of
AnyRef
, not just Throwable
or one of its subclasses. In
Scala, exceptions can be caught based on traits they implement, so it may at times make sense
to specify a trait that the intercepted exception's class must mix in. If a class instance is
passed for a type that could not possibly be used to catch an exception (such as String
,
for example), this method will complete abruptly with a TestFailedException
.
the function value that should throw the expected exception
an implicit Manifest
representing the type of the specified
type parameter.
the intercepted exception, if it is of the expected type
A List
of this Suite
object's nested Suite
s.
A List
of this Suite
object's nested Suite
s. If this Suite
contains no nested Suite
s,
this method returns an empty List
. This trait's implementation of this method returns an empty List
.
Throws TestPendingException
to indicate a test is pending.
Throws TestPendingException
to indicate a test is pending.
A pending test is one that has been given a name but is not yet implemented. The purpose of pending tests is to facilitate a style of testing in which documentation of behavior is sketched out before tests are written to verify that behavior (and often, the before the behavior of the system being tested is itself implemented). Such sketches form a kind of specification of what tests and functionality to implement later.
To support this style of testing, a test can be given a name that specifies one
bit of behavior required by the system being tested. The test can also include some code that
sends more information about the behavior to the reporter when the tests run. At the end of the test,
it can call method pending
, which will cause it to complete abruptly with TestPendingException
.
Because tests in ScalaTest can be designated as pending with TestPendingException
, both the test name and any information
sent to the reporter when running the test can appear in the report of a test run. (In other words,
the code of a pending test is executed just like any other test.) However, because the test completes abruptly
with TestPendingException
, the test will be reported as pending, to indicate
the actual test, and possibly the functionality it is intended to test, has not yet been implemented.
Note: This method always completes abruptly with a TestPendingException
. Thus it always has a side
effect. Methods with side effects are usually invoked with parentheses, as in pending()
. This
method is defined as a parameterless method, in flagrant contradiction to recommended Scala style, because it
forms a kind of DSL for pending tests. It enables tests in suites such as FunSuite
or FunSpec
to be denoted by placing "(pending)
" after the test name, as in:
test("that style rules are not laws") (pending)
Readers of the code see "pending" in parentheses, which looks like a little note attached to the test name to indicate
it is pending. Whereas "(pending())
looks more like a method call, "(pending)
" lets readers
stay at a higher level, forgetting how it is implemented and just focusing on the intent of the programmer who wrote the code.
Execute the passed block of code, and if it completes abruptly, throw TestPendingException
, else
throw TestFailedException
.
Execute the passed block of code, and if it completes abruptly, throw TestPendingException
, else
throw TestFailedException
.
This method can be used to temporarily change a failing test into a pending test in such a way that it will
automatically turn back into a failing test once the problem originally causing the test to fail has been fixed.
At that point, you need only remove the pendingUntilFixed
call. In other words, a
pendingUntilFixed
surrounding a block of code that isn't broken is treated as a test failure.
The motivation for this behavior is to encourage people to remove pendingUntilFixed
calls when
there are no longer needed.
This method facilitates a style of testing in which tests are written before the code they test. Sometimes you may
encounter a test failure that requires more functionality than you want to tackle without writing more tests. In this
case you can mark the bit of test code causing the failure with pendingUntilFixed
. You can then write more
tests and functionality that eventually will get your production code to a point where the original test won't fail anymore.
At this point the code block marked with pendingUntilFixed
will no longer throw an exception (because the
problem has been fixed). This will in turn cause pendingUntilFixed
to throw TestFailedException
with a detail message explaining you need to go back and remove the pendingUntilFixed
call as the problem orginally
causing your test code to fail has been fixed.
a block of code, which if it completes abruptly, should trigger a TestPendingException
Runs this suite of tests.
Runs this suite of tests.
If testName
is None
, this trait's implementation of this method
calls these two methods on this object in this order:
runNestedSuites(report, stopper, tagsToInclude, tagsToExclude, configMap, distributor)
runTests(testName, report, stopper, tagsToInclude, tagsToExclude, configMap)
If testName
is defined, then this trait's implementation of this method
calls runTests
, but does not call runNestedSuites
. This behavior
is part of the contract of this method. Subclasses that override run
must take
care not to call runNestedSuites
if testName
is defined. (The
OneInstancePerTest
trait depends on this behavior, for example.)
Subclasses and subtraits that override this run
method can implement them without
invoking either the runTests
or runNestedSuites
methods, which
are invoked by this trait's implementation of this method. It is recommended, but not required,
that subclasses and subtraits that override run
in a way that does not
invoke runNestedSuites
also override runNestedSuites
and make it
final. Similarly it is recommended, but not required,
that subclasses and subtraits that override run
in a way that does not
invoke runTests
also override runTests
(and runTest
,
which this trait's implementation of runTests
calls) and make it
final. The implementation of these final methods can either invoke the superclass implementation
of the method, or throw an UnsupportedOperationException
if appropriate. The
reason for this recommendation is that ScalaTest includes several traits that override
these methods to allow behavior to be mixed into a Suite
. For example, trait
BeforeAndAfterEach
overrides runTests
s. In a Suite
subclass that no longer invokes runTests
from run
, the
BeforeAndAfterEach
trait is not applicable. Mixing it in would have no effect.
By making runTests
final in such a Suite
subtrait, you make
the attempt to mix BeforeAndAfterEach
into a subclass of your subtrait
a compiler error. (It would fail to compile with a complaint that BeforeAndAfterEach
is trying to override runTests
, which is a final method in your trait.)
an optional name of one test to run. If None
, all relevant tests should be run.
I.e., None
acts like a wildcard that means run all relevant tests in this Suite
.
the Reporter
to which results will be reported
the Stopper
that will be consulted to determine whether to stop execution early.
a Filter
with which to filter tests based on their tags
a Map
of key-value pairs that can be used by the executing Suite
of tests.
an optional Distributor
, into which to put nested Suite
s to be run
by another entity, such as concurrently by a pool of threads. If None
, nested Suite
s will be run sequentially.
a Tracker
tracking Ordinal
s being fired by the current thread.
Run zero to many of this Suite
's nested Suite
s.
Run zero to many of this Suite
's nested Suite
s.
If the passed distributor
is None
, this trait's
implementation of this method invokes run
on each
nested Suite
in the List
obtained by invoking nestedSuites
.
If a nested Suite
's run
method completes abruptly with an exception, this trait's implementation of this
method reports that the Suite
aborted and attempts to run the
next nested Suite
.
If the passed distributor
is defined, this trait's implementation
puts each nested Suite
into the Distributor
contained in the Some
, in the order in which the
Suite
s appear in the List
returned by nestedSuites
, passing
in a new Tracker
obtained by invoking nextTracker
on the Tracker
passed to this method.
Implementations of this method are responsible for ensuring SuiteStarting
events
are fired to the Reporter
before executing any nested Suite
, and either SuiteCompleted
or SuiteAborted
after executing any nested Suite
.
the Reporter
to which results will be reported
the Stopper
that will be consulted to determine whether to stop execution early.
a Filter
with which to filter tests based on their tags
a Map
of key-value pairs that can be used by the executing Suite
of tests.
an optional Distributor
, into which to put nested Suite
s to be run
by another entity, such as concurrently by a pool of threads. If None
, nested Suite
s will be run sequentially.
a Tracker
tracking Ordinal
s being fired by the current thread.
Run a test.
Run a test.
This trait's implementation uses Java reflection to invoke on this object the test method identified by the passed testName
.
Implementations of this method are responsible for ensuring a TestStarting
event
is fired to the Reporter
before executing any test, and either TestSucceeded
,
TestFailed
, or TestPending
after executing any nested
Suite
. (If a test is marked with the org.scalatest.Ignore
tag, the
runTests
method is responsible for ensuring a TestIgnored
event is fired and that
this runTest
method is not invoked for that ignored test.)
the name of one test to run.
the Reporter
to which results will be reported
the Stopper
that will be consulted to determine whether to stop execution early.
a Map
of key-value pairs that can be used by the executing Suite
of tests.
a Tracker
tracking Ordinal
s being fired by the current thread.
Run zero to many of this Suite
's tests.
Run zero to many of this Suite
's tests.
This method takes a testName
parameter that optionally specifies a test to invoke.
If testName
is defined, this trait's implementation of this method
invokes runTest
on this object, passing in:
testName
- the String
value of the testName
Option
passed
to this methodreporter
- the Reporter
passed to this method, or one that wraps and delegates to itstopper
- the Stopper
passed to this method, or one that wraps and delegates to itconfigMap
- the configMap
Map
passed to this method, or one that wraps and delegates to itThis method takes a Filter
, which encapsulates an optional Set
of tag names that should be included
(tagsToInclude
) and a Set
that should be excluded (tagsToExclude
), when deciding which
of this Suite
's tests to run.
If tagsToInclude
is None
, all tests will be run
except those those belonging to tags listed in the tagsToExclude
Set
. If tagsToInclude
is defined, only tests
belonging to tags mentioned in the tagsToInclude
Set
, and not mentioned in the tagsToExclude
Set
will be run. However, if testName
is defined, tagsToInclude
and tagsToExclude
are essentially ignored.
Only if testName
is None
will tagsToInclude
and tagsToExclude
be consulted to
determine which of the tests named in the testNames
Set
should be run. This trait's implementation
behaves this way, and it is part of the general contract of this method, so all overridden forms of this method should behave
this way as well. For more information on test tags, see the main documentation for this trait and for class Filter
.
Note that this means that even if a test is marked as ignored, for example a test method in a Suite
annotated with
org.scalatest.Ignore
, if that test name is passed as testName
to runTest
, it will be invoked
despite the Ignore
annotation.
If testName
is None
, this trait's implementation of this method
invokes testNames
on this Suite
to get a Set
of names of tests to potentially run.
(A testNames
value of None
essentially acts as a wildcard that means all tests in
this Suite
that are selected by tagsToInclude
and tagsToExclude
should be run.)
For each test in the testName
Set
, in the order
they appear in the iterator obtained by invoking the elements
method on the Set
, this trait's implementation
of this method checks whether the test should be run based on the Filter
.
If so, this implementation invokes runTest
, passing in:
testName
- the String
name of the test to run (which will be one of the names in the testNames
Set
)reporter
- the Reporter
passed to this method, or one that wraps and delegates to itstopper
- the Stopper
passed to this method, or one that wraps and delegates to itconfigMap
- the configMap
passed to this method, or one that wraps and delegates to itIf a test is marked with the org.scalatest.Ignore
tag, implementations
of this method are responsible for ensuring a TestIgnored
event is fired for that test
and that runTest
is not called for that test.
an optional name of one test to run. If None
, all relevant tests should be run.
I.e., None
acts like a wildcard that means run all relevant tests in this Suite
.
the Reporter
to which results will be reported
the Stopper
that will be consulted to determine whether to stop execution early.
a Filter
with which to filter tests based on their tags
a Map
of key-value pairs that can be used by the executing Suite
of tests.
an optional Distributor
, into which to put nested Suite
s to be run
by another entity, such as concurrently by a pool of threads. If None
, nested Suite
s will be run sequentially.
a Tracker
tracking Ordinal
s being fired by the current thread.
A user-friendly suite name for this Suite
.
A user-friendly suite name for this Suite
.
This trait's
implementation of this method returns the simple name of this object's class. This
trait's implementation of runNestedSuites
calls this method to obtain a
name for Report
s to pass to the suiteStarting
, suiteCompleted
,
and suiteAborted
methods of the Reporter
.
this Suite
object's suite name.
A Map
whose keys are String
tag names with which tests in this Suite
are marked, and
whose values are the Set
of test names marked with each tag.
A Map
whose keys are String
tag names with which tests in this Suite
are marked, and
whose values are the Set
of test names marked with each tag. If this Suite
contains no tags, this
method returns an empty Map
.
This trait's implementation of this method uses Java reflection to discover any Java annotations attached to its test methods. The
fully qualified name of each unique annotation that extends TagAnnotation
is considered a tag. This trait's
implementation of this method, therefore, places one key/value pair into to the
Map
for each unique tag annotation name discovered through reflection. The mapped value for each tag name key will contain
the test method name, as provided via the testNames
method.
Subclasses may override this method to define and/or discover tags in a custom manner, but overriding method implementations
should never return an empty Set
as a value. If a tag has no tests, its name should not appear as a key in the
returned Map
.
A Set
of test names.
A Set
of test names. If this Suite
contains no tests, this method returns an empty Set
.
This trait's implementation of this method uses Java reflection to discover all public methods whose name starts with "test"
,
which take either nothing or a single Informer
as parameters. For each discovered test method, it assigns a test name
comprised of just the method name if the method takes no parameters, or the method name plus (Informer)
if the
method takes a Informer
. Here are a few method signatures and the names that this trait's implementation assigns them:
def testCat() {} // test name: "testCat" def testCat(Informer) {} // test name: "testCat(Informer)" def testDog() {} // test name: "testDog" def testDog(Informer) {} // test name: "testDog(Informer)" def test() {} // test name: "test" def test(Informer) {} // test name: "test(Informer)"
This trait's implementation of this method returns an immutable Set
of all such names, excluding the name
testNames
. The iterator obtained by invoking elements
on this
returned Set
will produce the test names in their natural order, as determined by String
's
compareTo
method.
This trait's implementation of runTests
invokes this method
and calls runTest
for each test name in the order they appear in the returned Set
's iterator.
Although this trait's implementation of this method returns a Set
whose iterator produces String
test names in a well-defined order, the contract of this method does not required a defined order. Subclasses are free to
override this method and return test names in an undefined order, or in a defined order that's different from String
's
natural order.
Subclasses may override this method to produce test names in a custom manner. One potential reason to override testNames
is
to run tests in a different order, for example, to ensure that tests that depend on other tests are run after those other tests.
Another potential reason to override is allow tests to be defined in a different manner, such as methods annotated @Test
annotations
(as is done in JUnitSuite
and TestNGSuite
) or test functions registered during construction (as is
done in FunSuite
and FunSpec
).
Executes the block of code passed as the second parameter, and, if it
completes abruptly with a ModifiableMessage
exception,
prepends the "clue" string passed as the first parameter to the beginning of the detail message
of that thrown exception, then rethrows it.
Executes the block of code passed as the second parameter, and, if it
completes abruptly with a ModifiableMessage
exception,
prepends the "clue" string passed as the first parameter to the beginning of the detail message
of that thrown exception, then rethrows it. If clue does not end in a white space
character, one space will be added
between it and the existing detail message (unless the detail message is
not defined).
This method allows you to add more information about what went wrong that will be reported when a test fails. Here's an example:
withClue("(Employee's name was: " + employee.name + ")") { intercept[IllegalArgumentException] { employee.getTask(-1) } }
If an invocation of intercept
completed abruptly with an exception, the resulting message would be something like:
(Employee's name was Bob Jones) Expected IllegalArgumentException to be thrown, but no exception was thrown
Run the passed test function in the context of a fixture established by this method.
Run the passed test function in the context of a fixture established by this method.
This method should set up the fixture needed by the tests of the
current suite, invoke the test function, and if needed, perform any clean
up needed after the test completes. Because the NoArgTest
function
passed to this method takes no parameters, preparing the fixture will require
side effects, such as reassigning instance var
s in this Suite
or initializing
a globally accessible external database. If you want to avoid reassigning instance var
s
you can use fixture.Suite.
This trait's implementation of runTest
invokes this method for each test, passing
in a NoArgTest
whose apply
method will execute the code of the test.
This trait's implementation of this method simply invokes the passed NoArgTest
function.
the no-arg test function to run with a fixture
Suite
that can pass a fixture object into its tests.The purpose of
fixture.Suite
and its subtraits is to facilitate writing tests in a functional style. Some users may prefer writing tests in a functional style in general, but one particular use case is parallel test execution (See ParallelTestExecution). To run tests in parallel, your test class must be thread safe, and a good way to make it thread safe is to make it functional. A good way to write tests that need common fixtures in a functional style is to pass the fixture objects into the tests, the style enabled by thefixture.Suite
family of traits.Trait
fixture.Suite
behaves similarly to traitorg.scalatest.Suite
, except that tests may have a fixture parameter. The type of the fixture parameter is defined by the abstractFixtureParam
type, which is declared as a member of this trait. This trait also declares an abstractwithFixture
method. ThiswithFixture
method takes aOneArgTest
, which is a nested trait defined as a member of this trait.OneArgTest
has anapply
method that takes aFixtureParam
. Thisapply
method is responsible for running a test. This trait'srunTest
method delegates the actual running of each test towithFixture
, passing in the test code to run via theOneArgTest
argument. ThewithFixture
method (abstract in this trait) is responsible for creating the fixture argument and passing it to the test function.Subclasses of this trait must, therefore, do three things differently from a plain old
org.scalatest.Suite
:FixtureParam
withFixture(OneArgTest)
methodHere's an example:
In the previous example,
withFixture
creates and initializes a stack, then invokes the test function, passing in the stack. In addition to setting up a fixture before a test, thewithFixture
method also allows you to clean it up afterwards, if necessary. If you need to do some clean up that must happen even if a test fails, you should invoke the test function from inside atry
block and do the cleanup in afinally
clause, like this:The reason you must perform cleanup in a
finally
clause is thatwithFixture
is called byrunTest
, which expects an exception to be thrown to indicate a failed test. Thus when you invoke thetest
function, it may complete abruptly with an exception. Thefinally
clause will ensure the fixture cleanup happens as that exception propagates back up the call stack torunTest
.If the fixture you want to pass into your tests consists of multiple objects, you will need to combine them into one object to use this trait. One good approach to passing multiple fixture objects is to encapsulate them in a case class. Here's an example:
Configuring fixtures and tests
Sometimes you may want to write tests that are configurable. For example, you may want to write a suite of tests that each take an open temp file as a fixture, but whose file name is specified externally so that the file name can be can be changed from run to run. To accomplish this the
OneArgTest
trait has aconfigMap
method, which will return aMap[String, Any]
from which configuration information may be obtained. TherunTest
method of this trait will pass aOneArgTest
towithFixture
whoseconfigMap
method returns theconfigMap
passed torunTest
. Here's an example in which the name of a temp file is taken from the passedconfigMap
:If you want to pass into each test the entire
configMap
that was passed torunTest
, you can mix in traitConfigMapFixture
. See the documentation forConfigMapFixture
for the details, but here's a quick example of how it looks:Providing multiple fixtures
If different tests in the same
fixture.Suite
need different shared fixtures, you can use the loan pattern to supply to each test just the fixture or fixtures it needs. First select the most commonly used fixture objects and pass them in via theFixtureParam
. Then for each remaining fixture needed by multiple tests, create a with<fixture name> method that takes a function you will use to pass the fixture to the test. Lasty, use the appropriate with<fixture name> method or methods in each test.In the following example, the
FixtureParam
is set toMap[String, Any]
by mixing inConfigMapFixture
. ThewithFixture
method in traitConfigMapFixture
will pass the config map to any test that needs it. In addition, some tests in the following example need aStack[Int]
and others aStack[String]
. ThewithIntStack
method takes care of supplying theStack[Int]
to those tests that need it, and thewithStringStack
method takes care of supplying theStack[String]
fixture. Here's how it looks:If you run the previous class in the Scala interpreter, you'll see: