Packages

trait ScalaFutures extends Futures

Provides an implicit conversion from scala.concurrent.Future[T] to FutureConcept[T].

This trait enables you to invoke the methods defined on FutureConcept on a Scala Future, as well as to pass a Scala future to the whenReady methods of supertrait Futures. The three ways this trait enables you to test futures are:

1. Invoking isReadyWithin, to assert that a future is ready within a a specified time period. Here's an example:

assert(result.isReadyWithin(100 millis))

2. Invoking futureValue, to obtain a futures result within a specified or implicit time period, like this:

assert(result.futureValue === 7)

// Or, if you expect the future to fail:
assert(result.failed.futureValue.isInstanceOf[ArithmeticException])

3. Passing the future to whenReady, and performing assertions on the result value passed to the given function, as in:

whenReady(result) { s =>
  s should be ("hello")
}

The whenReady construct periodically inspects the passed future, until it is either ready or the configured timeout has been surpassed. If the future becomes ready before the timeout, whenReady passes the future's value to the specified function.

To make whenReady more broadly applicable, the type of future it accepts is a FutureConcept[T], where T is the type of value promised by the future. Passing a future to whenReady requires an implicit conversion from the type of future you wish to pass (the modeled type) to FutureConcept[T]. Subtrait JavaFutures provides an implicit conversion from java.util.concurrent.Future[T] to FutureConcept[T].

For example, the following invocation of whenReady would succeed (not throw an exception):

import org.scalatest._
import Matchers._
import concurrent.Futures._
import java.util.concurrent._

val exec = Executors.newSingleThreadExecutor
val task = new Callable[String] { def call() = { Thread.sleep(50); "hi" } }
whenReady(exec.submit(task)) { s =>
  s should be ("hi")
}

However, because the default timeout is 150 milliseconds, the following invocation of whenReady would ultimately produce a TestFailedException:

val task = new Callable[String] { def call() = { Thread.sleep(500); "hi" } }
whenReady(exec.submit(task)) { s =>
  s should be ("hi")
}

Assuming the default configuration parameters, a timeout of 150 milliseconds and an interval of 15 milliseconds, were passed implicitly to whenReady, the detail message of the thrown TestFailedException would look like:

The future passed to whenReady was never ready, so whenReady timed out. Queried 95 times, sleeping 10 milliseconds between each query.

Configuration of whenReady

The whenReady methods of this trait can be flexibly configured. The two configuration parameters for whenReady along with their default values and meanings are described in the following table:

Configuration Parameter Default Value Meaning
timeout scaled(150 milliseconds) the maximum amount of time to allow unsuccessful queries before giving up and throwing TestFailedException
interval scaled(15 milliseconds) the amount of time to sleep between each query

The default values of both timeout and interval are passed to the scaled method, inherited from ScaledTimeSpans, so that the defaults can be scaled up or down together with other scaled time spans. See the documentation for trait ScaledTimeSpans for more information.

The whenReady methods of trait Futures each take a PatienceConfig object as an implicit parameter. This object provides values for the two configuration parameters. Trait Futures provides an implicit val named defaultPatience with each configuration parameter set to its default value. If you want to set one or more configuration parameters to a different value for all invocations of whenReady in a suite you can override this val (or hide it, for example, if you are importing the members of the Futures companion object rather than mixing in the trait). For example, if you always want the default timeout to be 2 seconds and the default interval to be 5 milliseconds, you can override defaultPatience, like this:

implicit override val defaultPatience =
  PatienceConfig(timeout = Span(2, Seconds), interval = Span(5, Millis))

Or, hide it by declaring a variable of the same name in whatever scope you want the changed values to be in effect:

implicit val defaultPatience =
  PatienceConfig(timeout =  Span(2, Seconds), interval = Span(5, Millis))

In addition to taking a PatienceConfig object as an implicit parameter, the whenReady methods of trait Futures include overloaded forms that take one or two PatienceConfigParam objects that you can use to override the values provided by the implicit PatienceConfig for a single whenReady invocation. For example, if you want to set timeout to 6 seconds for just one particular whenReady invocation, you can do so like this:

whenReady (exec.submit(task), timeout(Span(6, Seconds))) { s =>
  s should be ("hi")
}

This invocation of eventually will use 6000 for timeout and whatever value is specified by the implicitly passed PatienceConfig object for the interval configuration parameter. If you want to set both configuration parameters in this way, just list them separated by commas:

whenReady (exec.submit(task), timeout(Span(6, Seconds)), interval(Span(500, Millis))) { s =>
  s should be ("hi")
}

You can also import or mix in the members of SpanSugar if you want a more concise DSL for expressing time spans:

whenReady (exec.submit(task), timeout(6 seconds), interval(500 millis)) { s =>
  s should be ("hi")
}

Note: The whenReady construct was in part inspired by the whenDelivered matcher of the BlueEyes project, a lightweight, asynchronous web framework for Scala.

Source
ScalaFutures.scala
Linear Supertypes
Futures, PatienceConfiguration, AbstractPatienceConfiguration, ScaledTimeSpans, AnyRef, Any
Known Subclasses
ScalaFutures
Ordering
  1. Alphabetic
  2. By Inheritance
Inherited
  1. ScalaFutures
  2. Futures
  3. PatienceConfiguration
  4. AbstractPatienceConfiguration
  5. ScaledTimeSpans
  6. AnyRef
  7. Any
  1. Hide All
  2. Show All
Visibility
  1. Public
  2. All

Type Members

  1. final case class PatienceConfig (timeout: Span = scaled(Span(150, Millis)), interval: Span = scaled(Span(15, Millis))) extends Product with Serializable

    Configuration object for asynchronous constructs, such as those provided by traits Eventually and Waiters.

    Configuration object for asynchronous constructs, such as those provided by traits Eventually and Waiters.

    The default values for the parameters are:

    Configuration ParameterDefault Value
    timeout scaled(150 milliseconds)
    interval scaled(15 milliseconds)

    timeout

    the maximum amount of time to wait for an asynchronous operation to complete before giving up and throwing TestFailedException.

    interval

    the amount of time to sleep between each check of the status of an asynchronous operation when polling

    Definition Classes
    AbstractPatienceConfiguration
  2. trait FutureConcept [T] extends AnyRef

    Concept trait for futures, instances of which are passed to the whenReady methods of trait Futures.

    Concept trait for futures, instances of which are passed to the whenReady methods of trait Futures.

    See the documentation for trait Futures for the details on the syntax this trait provides for testing with futures.

    Definition Classes
    Futures

Value Members

  1. final def !=(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  2. final def ##(): Int
    Definition Classes
    AnyRef → Any
  3. final def ==(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  4. final def asInstanceOf[T0]: T0
    Definition Classes
    Any
  5. def clone(): AnyRef
    Attributes
    protected[java.lang]
    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  6. implicit def convertScalaFuture[T](scalaFuture: Future[T]): FutureConcept[T]

    Implicitly converts a scala.concurrent.Future[T] to FutureConcept[T], allowing you to invoke the methods defined on FutureConcept on a Scala Future, as well as to pass a Scala future to the whenReady methods of supertrait Futures.

    Implicitly converts a scala.concurrent.Future[T] to FutureConcept[T], allowing you to invoke the methods defined on FutureConcept on a Scala Future, as well as to pass a Scala future to the whenReady methods of supertrait Futures.

    See the documentation for supertrait Futures for the details on the syntax this trait provides for testing with Java futures.

    If the eitherValue method of the underlying Scala future returns a scala.Some containing a scala.util.Failure containing a java.util.concurrent.ExecutionException, and this exception contains a non-null cause, that cause will be included in the TestFailedException as its cause. The ExecutionException will be be included as the TestFailedException's cause only if the ExecutionException's cause is null.

    The isExpired method of the returned FutureConcept will always return false, because the underlying type, scala.concurrent.Future, does not support the notion of expiration. Likewise, the isCanceled method of the returned FutureConcept will always return false, because the underlying type, scala.concurrent.Future, does not support the notion of cancelation.

    scalaFuture

    a scala.concurrent.Future[T] to convert

    returns

    a FutureConcept[T] wrapping the passed scala.concurrent.Future[T]

  7. final def eq(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  8. def equals(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  9. def finalize(): Unit
    Attributes
    protected[java.lang]
    Definition Classes
    AnyRef
    Annotations
    @throws( classOf[java.lang.Throwable] )
  10. final def getClass(): Class[_]
    Definition Classes
    AnyRef → Any
  11. def hashCode(): Int
    Definition Classes
    AnyRef → Any
  12. def interval(value: Span): Interval

    Returns an Interval configuration parameter containing the passed value, which specifies the amount of time to sleep after a retry.

    Returns an Interval configuration parameter containing the passed value, which specifies the amount of time to sleep after a retry.

    Definition Classes
    PatienceConfiguration
  13. final def isInstanceOf[T0]: Boolean
    Definition Classes
    Any
  14. final def ne(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  15. final def notify(): Unit
    Definition Classes
    AnyRef
  16. final def notifyAll(): Unit
    Definition Classes
    AnyRef
  17. implicit def patienceConfig: PatienceConfig

    Implicit PatienceConfig value providing default configuration values.

    Implicit PatienceConfig value providing default configuration values.

    To change the default configuration, override or hide this def with another implicit PatienceConfig containing your desired default configuration values.

    Definition Classes
    PatienceConfiguration → AbstractPatienceConfiguration
  18. final def scaled(span: Span): Span

    Scales the passed Span by the Double factor returned by spanScaleFactor.

    Scales the passed Span by the Double factor returned by spanScaleFactor.

    The Span is scaled by invoking its scaledBy method, thus this method has the same behavior: The value returned by spanScaleFactor can be any positive number or zero, including a fractional number. A number greater than one will scale the Span up to a larger value. A fractional number will scale it down to a smaller value. A factor of 1.0 will cause the exact same Span to be returned. A factor of zero will cause Span.ZeroLength to be returned. If overflow occurs, Span.Max will be returned. If underflow occurs, Span.ZeroLength will be returned.

    Definition Classes
    ScaledTimeSpans
    Exceptions thrown

    IllegalArgumentException if the value returned from spanScaleFactor is less than zero

  19. def spanScaleFactor: Double

    The factor by which the scaled method will scale Spans.

    The factor by which the scaled method will scale Spans.

    The default implementation of this method will return the span scale factor that was specified for the run, or 1.0 if no factor was specified. For example, you can specify a span scale factor when invoking ScalaTest via the command line by passing a -F argument to Runner.

    Definition Classes
    ScaledTimeSpans
  20. final def synchronized[T0](arg0: ⇒ T0): T0
    Definition Classes
    AnyRef
  21. def timeout(value: Span): Timeout

    Returns a Timeout configuration parameter containing the passed value, which specifies the maximum amount to wait for an asynchronous operation to complete.

    Returns a Timeout configuration parameter containing the passed value, which specifies the maximum amount to wait for an asynchronous operation to complete.

    Definition Classes
    PatienceConfiguration
  22. def toString(): String
    Definition Classes
    AnyRef → Any
  23. final def wait(): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  24. final def wait(arg0: Long, arg1: Int): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  25. final def wait(arg0: Long): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  26. final def whenReady[T, U](future: FutureConcept[T])(fun: (T) ⇒ U)(implicit config: PatienceConfig, pos: Position): U

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    The maximum amount of time in milliseconds to tolerate unsuccessful attempts before giving up is configured by the timeout field of the PatienceConfig passed implicitly as the last parameter. The interval to sleep between attempts is configured by the interval field of the PatienceConfig passed implicitly as the last parameter.

    If the eitherValue method of the underlying Scala future returns a scala.Some containing a scala.util.Failure containing a java.util.concurrent.ExecutionException, and this exception contains a non-null cause, that cause will be included in the TestFailedException as its cause. The ExecutionException will be be included as the TestFailedException's cause only if the ExecutionException's cause is null.

    future

    the future to query

    fun

    the function to which pass the future's value when it is ready

    config

    an PatienceConfig object containing timeout and interval parameters that are unused by this method

    returns

    the result of invoking the fun parameter

    Definition Classes
    Futures
  27. final def whenReady[T, U](future: FutureConcept[T], interval: Interval)(fun: (T) ⇒ U)(implicit config: PatienceConfig, pos: Position): U

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    The maximum amount of time in milliseconds to tolerate unsuccessful attempts before giving up is configured by the timeout field of the PatienceConfig passed implicitly as the last parameter. The interval to sleep between attempts is configured by the value contained in the passed interval parameter.

    future

    the future to query

    interval

    the Interval configuration parameter

    fun

    the function to which pass the future's value when it is ready

    config

    an PatienceConfig object containing timeout and interval parameters that are unused by this method

    returns

    the result of invoking the fun parameter

    Definition Classes
    Futures
  28. final def whenReady[T, U](future: FutureConcept[T], timeout: Timeout)(fun: (T) ⇒ U)(implicit config: PatienceConfig, pos: Position): U

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    The maximum amount of time in milliseconds to tolerate unsuccessful queries before giving up and throwing TestFailedException is configured by the value contained in the passed timeout parameter. The interval to sleep between attempts is configured by the interval field of the PatienceConfig passed implicitly as the last parameter.

    If the eitherValue method of the underlying Scala future returns a scala.Some containing a scala.util.Failure containing a java.util.concurrent.ExecutionException, and this exception contains a non-null cause, that cause will be included in the TestFailedException as its cause. The ExecutionException will be be included as the TestFailedException's cause only if the ExecutionException's cause is null.

    future

    the future to query

    timeout

    the Timeout configuration parameter

    fun

    the function to which pass the future's value when it is ready

    config

    an PatienceConfig object containing timeout and interval parameters that are unused by this method

    returns

    the result of invoking the fun parameter

    Definition Classes
    Futures
  29. final def whenReady[T, U](future: FutureConcept[T], timeout: Timeout, interval: Interval)(fun: (T) ⇒ U)(implicit config: PatienceConfig, pos: Position): U

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    The maximum amount of time to tolerate unsuccessful queries before giving up and throwing TestFailedException is configured by the value contained in the passed timeout parameter. The interval to sleep between attempts is configured by the value contained in the passed interval parameter.

    If the eitherValue method of the underlying Scala future returns a scala.Some containing a scala.util.Failure containing a java.util.concurrent.ExecutionException, and this exception contains a non-null cause, that cause will be included in the TestFailedException as its cause. The ExecutionException will be be included as the TestFailedException's cause only if the ExecutionException's cause is null.

    future

    the future to query

    timeout

    the Timeout configuration parameter

    interval

    the Interval configuration parameter

    fun

    the function to which pass the future's value when it is ready

    config

    an PatienceConfig object containing timeout and interval parameters that are unused by this method

    returns

    the result of invoking the fun parameter

    Definition Classes
    Futures

Inherited from Futures

Inherited from PatienceConfiguration

Inherited from AbstractPatienceConfiguration

Inherited from ScaledTimeSpans

Inherited from AnyRef

Inherited from Any

Ungrouped