Packages

c

org.scalatest

AsyncFlatSpec

abstract class AsyncFlatSpec extends AsyncFlatSpecLike

Enables testing of asynchronous code without blocking, using a style consistent with traditional FlatSpec tests.

Recommended Usage: AsyncFlatSpec is intended to enable users of FlatSpec to write non-blocking asynchronous tests that are consistent with their traditional FlatSpec tests. Note: AsyncFlatSpec is intended for use in special situations where non-blocking asynchronous testing is needed, with class FlatSpec used for general needs.

Given a Future returned by the code you are testing, you need not block until the Future completes before performing assertions against its value. You can instead map those assertions onto the Future and return the resulting Future[Assertion] to ScalaTest. The test will complete asynchronously, when the Future[Assertion] completes.

Trait AsyncFlatSpec is so named because your specification text and tests line up flat against the left-side indentation level, with no nesting needed. Here's an example AsyncFlatSpec:

package org.scalatest.examples.asyncflatspec

import org.scalatest.AsyncFlatSpec import scala.concurrent.Future
class AddSpec extends AsyncFlatSpec {
def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
behavior of "addSoon"
it should "eventually compute a sum of passed Ints" in { val futureSum: Future[Int] = addSoon(1, 2) // You can map assertions onto a Future, then return // the resulting Future[Assertion] to ScalaTest: futureSum map { sum => assert(sum == 3) } }
def addNow(addends: Int*): Int = addends.sum
"addNow" should "immediately compute a sum of passed Ints" in { val sum: Int = addNow(1, 2) // You can also write synchronous tests. The body // must have result type Assertion: assert(sum == 3) } }

The initial test in this example demonstrates the use of an explicit behavior of clause, which establishes addSoon as the subject. The second test demonstrates the alternate syntax of replacing the first it with the subject string, in this case, "addNow". As with traditional FlatSpecs, you can use must or can as well as should. For example, instead of it should "eventually..., you could write it must "eventually... or it can "eventually.... You can also write they instead of it. See the documentation for FlatSpec for more detail.

Running the above AddSpec in the Scala interpreter would yield:

addSoon
- should eventually compute a sum of passed Ints
- should immediately compute a sum of passed Ints

Starting with version 3.0.0, ScalaTest assertions and matchers have result type Assertion. The result type of the first test in the example above, therefore, is Future[Assertion]. For clarity, here's the relevant code in a REPL session:

scala> import org.scalatest._
import org.scalatest._

scala> import Assertions._
import Assertions._

scala> import scala.concurrent.Future
import scala.concurrent.Future

scala> import scala.concurrent.ExecutionContext
import scala.concurrent.ExecutionContext

scala> implicit val executionContext = ExecutionContext.Implicits.global
executionContext: scala.concurrent.ExecutionContextExecutor = scala.concurrent.impl.ExecutionContextImpl@26141c5b

scala> def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
addSoon: (addends: Int*)scala.concurrent.Future[Int]

scala> val futureSum: Future[Int] = addSoon(1, 2)
futureSum: scala.concurrent.Future[Int] = scala.concurrent.impl.Promise$DefaultPromise@721f47b2

scala> futureSum map { sum => assert(sum == 3) }
res0: scala.concurrent.Future[org.scalatest.Assertion] = scala.concurrent.impl.Promise$DefaultPromise@3955cfcb

The second test has result type Assertion:

scala> def addNow(addends: Int*): Int = addends.sum
addNow: (addends: Int*)Int

scala> val sum: Int = addNow(1, 2)
sum: Int = 3

scala> assert(sum == 3)
res1: org.scalatest.Assertion = Succeeded

When AddSpec is constructed, the second test will be implicitly converted to Future[Assertion] and registered. The implicit conversion is from Assertion to Future[Assertion], so you must end synchronous tests in some ScalaTest assertion or matcher expression. If a test would not otherwise end in type Assertion, you can place succeed at the end of the test. succeed, a field in trait Assertions, returns the Succeeded singleton:

scala> succeed
res2: org.scalatest.Assertion = Succeeded

Thus placing succeed at the end of a test body will satisfy the type checker:

"addNow" should "immediately compute a sum of passed Ints" in {
  val sum: Int = addNow(1, 2)
  assert(sum == 3)
  println("hi") // println has result type Unit
  succeed       // succeed has result type Assertion
}

An AsyncFlatSpec's lifecycle has two phases: the registration phase and the ready phase. It starts in registration phase and enters ready phase the first time run is called on it. It then remains in ready phase for the remainder of its lifetime.

Tests can only be registered with the it method while the AsyncFlatSpec is in its registration phase. Any attempt to register a test after the AsyncFlatSpec has entered its ready phase, i.e., after run has been invoked on the AsyncFlatSpec, will be met with a thrown TestRegistrationClosedException. The recommended style of using AsyncFlatSpec is to register tests during object construction as is done in all the examples shown here. If you keep to the recommended style, you should never see a TestRegistrationClosedException.

Asynchronous execution model

AsyncFlatSpec extends AsyncTestSuite, which provides an implicit scala.concurrent.ExecutionContext named executionContext. This execution context is used by AsyncFlatSpec to transform the Future[Assertion]s returned by each test into the FutureOutcome returned by the test function passed to withFixture. This ExecutionContext is also intended to be used in the tests, including when you map assertions onto futures.

On both the JVM and Scala.js, the default execution context provided by ScalaTest's asynchronous testing styles confines execution to a single thread per test. On JavaScript, where single-threaded execution is the only possibility, the default execution context is scala.scalajs.concurrent.JSExecutionContext.Implicits.queue. On the JVM, the default execution context is a serial execution context provided by ScalaTest itself.

When ScalaTest's serial execution context is called upon to execute a task, that task is recorded in a queue for later execution. For example, one task that will be placed in this queue is the task that transforms the Future[Assertion] returned by an asynchronous test body to the FutureOutcome returned from the test function. Other tasks that will be queued are any transformations of, or callbacks registered on, Futures that occur in your test body, including any assertions you map onto Futures. Once the test body returns, the thread that executed the test body will execute the tasks in that queue one after another, in the order they were enqueued.

ScalaTest provides its serial execution context as the default on the JVM for three reasons. First, most often running both tests and suites in parallel does not give a significant performance boost compared to just running suites in parallel. Thus parallel execution of Future transformations within individual tests is not generally needed for performance reasons.

Second, if multiple threads are operating in the same suite concurrently, you'll need to make sure access to any mutable fixture objects by multiple threads is synchronized. Although access to mutable state along the same linear chain of Future transformations need not be synchronized, this does not hold true for callbacks, and in general it is easy to make a mistake. Simply put: synchronizing access to shared mutable state is difficult and error prone. Because ScalaTest's default execution context on the JVM confines execution of Future transformations and call backs to a single thread, you need not (by default) worry about synchronizing access to mutable state in your asynchronous-style tests.

Third, asynchronous-style tests need not be complete when the test body returns, because the test body returns a Future[Assertion]. This Future[Assertion] will often represent a test that has not yet completed. As a result, when using a more traditional execution context backed by a thread-pool, you could potentially start many more tests executing concurrently than there are threads in the thread pool. The more concurrently execute tests you have competing for threads from the same limited thread pool, the more likely it will be that tests will intermitently fail due to timeouts.

Using ScalaTest's serial execution context on the JVM will ensure the same thread that produced the Future[Assertion] returned from a test body is also used to execute any tasks given to the execution context while executing the test body—and that thread will not be allowed to do anything else until the test completes. If the serial execution context's task queue ever becomes empty while the Future[Assertion] returned by that test's body has not yet completed, the thread will block until another task for that test is enqueued. Although it may seem counter-intuitive, this blocking behavior means the total number of tests allowed to run concurrently will be limited to the total number of threads executing suites. This fact means you can tune the thread pool such that maximum performance is reached while avoiding (or at least, reducing the likelihood of) tests that fail due to timeouts because of thread competition.

This thread confinement strategy does mean, however, that when you are using the default execution context on the JVM, you must be sure to never block in the test body waiting for a task to be completed by the execution context. If you block, your test will never complete. This kind of problem will be obvious, because the test will consistently hang every time you run it. (If a test is hanging, and you're not sure which one it is, enable slowpoke notifications.) If you really do want to block in your tests, you may wish to just use a traditional FlatSpec with ScalaFutures instead. Alternatively, you could override the executionContext and use a traditional ExecutionContext backed by a thread pool. This will enable you to block in an asynchronous-style test on the JVM, but you'll need to worry about synchronizing access to shared mutable state.

To use a different execution context, just override executionContext. For example, if you prefer to use the runNow execution context on Scala.js instead of the default queue, you would write:

// on Scala.js
implicit override def executionContext =
    org.scalatest.concurrent.TestExecutionContext.runNow

If you prefer on the JVM to use the global execution context, which is backed by a thread pool, instead of ScalaTest's default serial execution contex, which confines execution to a single thread, you would write:

// on the JVM (and also compiles on Scala.js, giving
// you the queue execution context)
implicit override def executionContext =
    scala.concurrent.ExecutionContext.Implicits.global

Serial and parallel test execution

By default (unless you mix in ParallelTestExecution), tests in an AsyncFlatSpec will be executed one after another, i.e., serially. This is true whether those tests return Assertion or Future[Assertion], no matter what threads are involved. This default behavior allows you to re-use a shared fixture, such as an external database that needs to be cleaned after each test, in multiple tests in async-style suites. This is implemented by registering each test, other than the first test, to run as a continuation after the previous test completes.

If you want the tests of an AsyncFlatSpec to be executed in parallel, you must mix in ParallelTestExecution and enable parallel execution of tests in your build. You enable parallel execution in Runner with the -P command line flag. In the ScalaTest Maven Plugin, set parallel to true. In sbt, parallel execution is the default, but to be explicit you can write:

parallelExecution in Test := true // the default in sbt

On the JVM, if both ParallelTestExecution is mixed in and parallel execution is enabled in the build, tests in an async-style suite will be started in parallel, using threads from the Distributor, and allowed to complete in parallel, using threads from the executionContext. If you are using ScalaTest's serial execution context, the JVM default, asynchronous tests will run in parallel very much like traditional (such as FlatSpec) tests run in parallel: 1) Because ParallelTestExecution extends OneInstancePerTest, each test will run in its own instance of the test class, you need not worry about synchronizing access to mutable instance state shared by different tests in the same suite. 2) Because the serial execution context will confine the execution of each test to the single thread that executes the test body, you need not worry about synchronizing access to shared mutable state accessed by transformations and callbacks of Futures inside the test.

If ParallelTestExecution is mixed in but parallel execution of suites is not enabled, asynchronous tests on the JVM will be started sequentially, by the single thread that invoked run, but without waiting for one test to complete before the next test is started. As a result, asynchronous tests will be allowed to complete in parallel, using threads from the executionContext. If you are using the serial execution context, however, you'll see the same behavior you see when parallel execution is disabled and a traditional suite that mixes in ParallelTestExecution is executed: the tests will run sequentially. If you use an execution context backed by a thread-pool, such as global, however, even though tests will be started sequentially by one thread, they will be allowed to run concurrently using threads from the execution context's thread pool.

The latter behavior is essentially what you'll see on Scala.js when you execute a suite that mixes in ParallelTestExecution. Because only one thread exists when running under JavaScript, you can't "enable parallel execution of suites." However, it may still be useful to run tests in parallel on Scala.js, because tests can invoke API calls that are truly asynchronous by calling into external APIs that take advantage of non-JavaScript threads. Thus on Scala.js, ParallelTestExecution allows asynchronous tests to run in parallel, even though they must be started sequentially. This may give you better performance when you are using API calls in your Scala.js tests that are truly asynchronous.

Futures and expected exceptions

If you need to test for expected exceptions in the context of futures, you can use the recoverToSucceededIf and recoverToExceptionIf methods of trait RecoverMethods. Because this trait is mixed into supertrait AsyncTestSuite, both of these methods are available by default in an AsyncFlatSpec.

If you just want to ensure that a future fails with a particular exception type, and do not need to inspect the exception further, use recoverToSucceededIf:

recoverToSucceededIf[IllegalStateException] { // Result type: Future[Assertion]
  emptyStackActor ? Peek
}

The recoverToSucceededIf method performs a job similar to assertThrows, except in the context of a future. It transforms a Future of any type into a Future[Assertion] that succeeds only if the original future fails with the specified exception. Here's an example in the REPL:

scala> import org.scalatest.RecoverMethods._
import org.scalatest.RecoverMethods._

scala> import scala.concurrent.Future
import scala.concurrent.Future

scala> import scala.concurrent.ExecutionContext.Implicits.global
import scala.concurrent.ExecutionContext.Implicits.global

scala> recoverToSucceededIf[IllegalStateException] {
     |   Future { throw new IllegalStateException }
     | }
res0: scala.concurrent.Future[org.scalatest.Assertion] = ...

scala> res0.value
res1: Option[scala.util.Try[org.scalatest.Assertion]] = Some(Success(Succeeded))

Otherwise it fails with an error message similar to those given by assertThrows:

scala> recoverToSucceededIf[IllegalStateException] {
     |   Future { throw new RuntimeException }
     | }
res2: scala.concurrent.Future[org.scalatest.Assertion] = ...

scala> res2.value
res3: Option[scala.util.Try[org.scalatest.Assertion]] =
    Some(Failure(org.scalatest.exceptions.TestFailedException: Expected exception
      java.lang.IllegalStateException to be thrown, but java.lang.RuntimeException
      was thrown))

scala> recoverToSucceededIf[IllegalStateException] {
     |   Future { 42 }
     | }
res4: scala.concurrent.Future[org.scalatest.Assertion] = ...

scala> res4.value
res5: Option[scala.util.Try[org.scalatest.Assertion]] =
    Some(Failure(org.scalatest.exceptions.TestFailedException: Expected exception
      java.lang.IllegalStateException to be thrown, but no exception was thrown))

The recoverToExceptionIf method differs from the recoverToSucceededIf in its behavior when the assertion succeeds: recoverToSucceededIf yields a Future[Assertion], whereas recoverToExceptionIf yields a Future[T], where T is the expected exception type.

recoverToExceptionIf[IllegalStateException] { // Result type: Future[IllegalStateException]
  emptyStackActor ? Peek
}

In other words, recoverToExpectionIf is to intercept as recovertToSucceededIf is to assertThrows. The first one allows you to perform further assertions on the expected exception. The second one gives you a result type that will satisfy the type checker at the end of the test body. Here's an example showing recoverToExceptionIf in the REPL:

scala> val futureEx =
     |   recoverToExceptionIf[IllegalStateException] {
     |     Future { throw new IllegalStateException("hello") }
     |   }
futureEx: scala.concurrent.Future[IllegalStateException] = ...

scala> futureEx.value
res6: Option[scala.util.Try[IllegalStateException]] =
    Some(Success(java.lang.IllegalStateException: hello))

scala> futureEx map { ex => assert(ex.getMessage == "world") }
res7: scala.concurrent.Future[org.scalatest.Assertion] = ...

scala> res7.value
res8: Option[scala.util.Try[org.scalatest.Assertion]] =
    Some(Failure(org.scalatest.exceptions.TestFailedException: "[hello]" did not equal "[world]"))

Ignored tests

To support the common use case of temporarily disabling a test, with the good intention of resurrecting the test at a later time, AsyncFlatSpec provides two ways to ignore a test, both demonstrated in the following example:

package org.scalatest.examples.asyncflatspec.ignore

import org.scalatest.AsyncFlatSpec import scala.concurrent.Future
class AddSpec extends AsyncFlatSpec {
def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
behavior of "addSoon"
ignore should "eventually compute a sum of passed Ints" in { val futureSum: Future[Int] = addSoon(1, 2) // You can map assertions onto a Future, then return // the resulting Future[Assertion] to ScalaTest: futureSum map { sum => assert(sum == 3) } }
def addNow(addends: Int*): Int = addends.sum
"addNow" should "immediately compute a sum of passed Ints" ignore { val sum: Int = addNow(1, 2) // You can also write synchronous tests. The body // must have result type Assertion: assert(sum == 3) } }

In the first test, ignore is used instead of it. In the second test, which uses the shorthand notation, no it exists to change into ignore. To ignore such tests, you must instead change in to ignore, as shown in the above example. If you run this version of AddSpec with:

scala> org.scalatest.run(new AddSpec)

It will report both tests as ignored:

AddSpec:
addSoon
- should eventually compute a sum of passed Ints !!! IGNORED !!!
addNow
- should immediately compute a sum of passed Ints !!! IGNORED !!!

If you wish to temporarily ignore an entire suite of tests, you can (on the JVM, not Scala.js) annotate the test class with @Ignore, like this:

package org.scalatest.examples.asyncflatspec.ignoreall

import org.scalatest.AsyncFlatSpec import scala.concurrent.Future import org.scalatest.Ignore
@Ignore class AddSpec extends AsyncFlatSpec {
def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
"addSoon" should "eventually compute a sum of passed Ints" in { val futureSum: Future[Int] = addSoon(1, 2) // You can map assertions onto a Future, then return // the resulting Future[Assertion] to ScalaTest: futureSum map { sum => assert(sum == 3) } }
def addNow(addends: Int*): Int = addends.sum
"addNow" should "immediately compute a sum of passed Ints" in { val sum: Int = addNow(1, 2) // You can also write synchronous tests. The body // must have result type Assertion: assert(sum == 3) } }

When you mark a test class with a tag annotation, ScalaTest will mark each test defined in that class with that tag. Thus, marking the AddSpec in the above example with the @Ignore tag annotation means that both tests in the class will be ignored. If you run the above AddSpec in the Scala interpreter, you'll see:

AddSpec:
addSoon
- should eventually compute a sum of passed Ints !!! IGNORED !!!
addNow
- should immediately compute a sum of passed Ints !!! IGNORED !!!

Note that marking a test class as ignored won't prevent it from being discovered by ScalaTest. Ignored classes will be discovered and run, and all their tests will be reported as ignored. This is intended to keep the ignored class visible, to encourage the developers to eventually fix and “un-ignore” it. If you want to prevent a class from being discovered at all (on the JVM, not Scala.js), use the DoNotDiscover annotation instead.

If you want to ignore all tests of a suite on Scala.js, where annotations can't be inspected at runtime, you'll need to change it to ignore at each test site. To make a suite non-discoverable on Scala.js, ensure it does not declare a public no-arg constructor. You can either declare a public constructor that takes one or more arguments, or make the no-arg constructor non-public. Because this technique will also make the suite non-discoverable on the JVM, it is a good approach for suites you want to run (but not be discoverable) on both Scala.js and the JVM.

Informers

One of the parameters to AsyncFlatSpec's run method is a Reporter, which will collect and report information about the running suite of tests. Information about suites and tests that were run, whether tests succeeded or failed, and tests that were ignored will be passed to the Reporter as the suite runs. Most often the reporting done by default by AsyncFlatSpec's methods will be sufficient, but occasionally you may wish to provide custom information to the Reporter from a test. For this purpose, an Informer that will forward information to the current Reporter is provided via the info parameterless method. You can pass the extra information to the Informer via its apply method. The Informer will then pass the information to the Reporter via an InfoProvided event.

One use case for the Informer is to pass more information about a specification to the reporter. For example, the GivenWhenThen trait provides methods that use the implicit info provided by AsyncFlatSpec to pass such information to the reporter. Here's an example:

package org.scalatest.examples.asyncflatspec.info

import collection.mutable import org.scalatest._
class SetSpec extends AsyncFlatSpec with GivenWhenThen {
"A mutable Set" should "allow an element to be added" in { Given("an empty mutable Set") val set = mutable.Set.empty[String]
When("an element is added") set += "clarity"
Then("the Set should have size 1") assert(set.size === 1)
And("the Set should contain the added element") assert(set.contains("clarity"))
info("That's all folks!") succeed } }

If you run this AsyncFlatSpec from the interpreter, you will see the following output:

scala> org.scalatest.run(new SetSpec)
SetSpec:
A mutable Set
- should allow an element to be added
  + Given an empty mutable Set
  + When an element is added
  + Then the Set should have size 1
  + And the Set should contain the added element
  + That's all folks! 

Documenters

AsyncFlatSpec also provides a markup method that returns a Documenter, which allows you to send to the Reporter text formatted in Markdown syntax. You can pass the extra information to the Documenter via its apply method. The Documenter will then pass the information to the Reporter via an MarkupProvided event.

Here's an example AsyncFlatSpec that uses markup:

package org.scalatest.examples.asyncflatspec.markup

import collection.mutable import org.scalatest._
class SetSpec extends AsyncFlatSpec with GivenWhenThen {
markup { """ Mutable Set ———-- A set is a collection that contains no duplicate elements. To implement a concrete mutable set, you need to provide implementations of the following methods: def contains(elem: A): Boolean def iterator: Iterator[A] def += (elem: A): this.type def -= (elem: A): this.type If you wish that methods like `take`, `drop`, `filter` return the same kind of set, you should also override: def empty: This It is also good idea to override methods `foreach` and `size` for efficiency. """ }
"A mutable Set" should "allow an element to be added" in { Given("an empty mutable Set") val set = mutable.Set.empty[String]
When("an element is added") set += "clarity"
Then("the Set should have size 1") assert(set.size === 1)
And("the Set should contain the added element") assert(set.contains("clarity"))
markup("This test finished with a **bold** statement!") succeed } }

Although all of ScalaTest's built-in reporters will display the markup text in some form, the HTML reporter will format the markup information into HTML. Thus, the main purpose of markup is to add nicely formatted text to HTML reports. Here's what the above SetSpec would look like in the HTML reporter:

Notifiers and alerters

ScalaTest records text passed to info and markup during tests, and sends the recorded text in the recordedEvents field of test completion events like TestSucceeded and TestFailed. This allows string reporters (like the standard out reporter) to show info and markup text after the test name in a color determined by the outcome of the test. For example, if the test fails, string reporters will show the info and markup text in red. If a test succeeds, string reporters will show the info and markup text in green. While this approach helps the readability of reports, it means that you can't use info to get status updates from long running tests.

To get immediate (i.e., non-recorded) notifications from tests, you can use note (a Notifier) and alert (an Alerter). Here's an example showing the differences:

package org.scalatest.examples.asyncflatspec.note

import collection.mutable import org.scalatest._
class SetSpec extends AsyncFlatSpec {
"A mutable Set" should "allow an element to be added" in {
info("info is recorded") markup("markup is *also* recorded") note("notes are sent immediately") alert("alerts are also sent immediately")
val set = mutable.Set.empty[String] set += "clarity" assert(set.size === 1) assert(set.contains("clarity")) } }

Because note and alert information is sent immediately, it will appear before the test name in string reporters, and its color will be unrelated to the ultimate outcome of the test: note text will always appear in green, alert text will always appear in yellow. Here's an example:

scala> org.scalatest.run(new SetSpec)
SetSpec:
A mutable Set
  + notes are sent immediately
  + alerts are also sent immediately
- should allow an element to be added
  + info is recorded
  + markup is *also* recorded

Another example is slowpoke notifications. If you find a test is taking a long time to complete, but you're not sure which test, you can enable slowpoke notifications. ScalaTest will use an Alerter to fire an event whenever a test has been running longer than a specified amount of time.

In summary, use info and markup for text that should form part of the specification output. Use note and alert to send status notifications. (Because the HTML reporter is intended to produce a readable, printable specification, info and markup text will appear in the HTML report, but note and alert text will not.)

Pending tests

A pending test is one that has been given a name but is not yet implemented. The purpose of pending tests is to facilitate a style of testing in which documentation of behavior is sketched out before tests are written to verify that behavior (and often, before the behavior of the system being tested is itself implemented). Such sketches form a kind of specification of what tests and functionality to implement later.

To support this style of testing, a test can be given a name that specifies one bit of behavior required by the system being tested. At the end of the test, it can call method pending, which will cause it to complete abruptly with TestPendingException.

Because tests in ScalaTest can be designated as pending with TestPendingException, both the test name and any information sent to the reporter when running the test can appear in the report of a test run. (In other words, the code of a pending test is executed just like any other test.) However, because the test completes abruptly with TestPendingException, the test will be reported as pending, to indicate the actual test, and possibly the functionality, has not yet been implemented. Here's an example:

package org.scalatest.examples.asyncflatspec.pending

import org.scalatest.AsyncFlatSpec import scala.concurrent.Future
class AddSpec extends AsyncFlatSpec {
def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
"addSoon" should "eventually compute a sum of passed Ints" in (pending)
def addNow(addends: Int*): Int = addends.sum
"addNow" should "immediately compute a sum of passed Ints" in { val sum: Int = addNow(1, 2) // You can also write synchronous tests. The body // must have result type Assertion: assert(sum == 3) } }

(Note: "(pending)" is the body of the test. Thus the test contains just one statement, an invocation of the pending method, which throws TestPendingException.) If you run this version of AddSpec with:

scala> org.scalatest.run(new AddSpec)

It will run both tests, but report that first test is pending. You'll see:

AddSpec:
addSoon
- should eventually compute a sum of passed Ints (pending)
addNow
- should immediately compute a sum of passed Ints

One difference between an ignored test and a pending one is that an ignored test is intended to be used during significant refactorings of the code under test, when tests break and you don't want to spend the time to fix all of them immediately. You can mark some of those broken tests as ignored temporarily, so that you can focus the red bar on just failing tests you actually want to fix immediately. Later you can go back and fix the ignored tests. In other words, by ignoring some failing tests temporarily, you can more easily notice failed tests that you actually want to fix. By contrast, a pending test is intended to be used before a test and/or the code under test is written. Pending indicates you've decided to write a test for a bit of behavior, but either you haven't written the test yet, or have only written part of it, or perhaps you've written the test but don't want to implement the behavior it tests until after you've implemented a different bit of behavior you realized you need first. Thus ignored tests are designed to facilitate refactoring of existing code whereas pending tests are designed to facilitate the creation of new code.

One other difference between ignored and pending tests is that ignored tests are implemented as a test tag that is excluded by default. Thus an ignored test is never executed. By contrast, a pending test is implemented as a test that throws TestPendingException (which is what calling the pending method does). Thus the body of pending tests are executed up until they throw TestPendingException.

Tagging tests

An AsyncFlatSpec's tests may be classified into groups by tagging them with string names. As with any suite, when executing an AsyncFlatSpec, groups of tests can optionally be included and/or excluded. To tag an AsyncFlatSpec's tests, you pass objects that extend class org.scalatest.Tag to methods that register tests. Class Tag takes one parameter, a string name. If you have created tag annotation interfaces as described in the Tag documentation, then you will probably want to use tag names on your test functions that match. To do so, simply pass the fully qualified names of the tag interfaces to the Tag constructor. For example, if you've defined a tag annotation interface with fully qualified name, com.mycompany.tags.DbTest, then you could create a matching tag for AsyncFlatSpecs like this:

package org.scalatest.examples.asyncflatspec.tagging

import org.scalatest.Tag
object DbTest extends Tag("com.mycompany.tags.DbTest")

Given these definitions, you could place AsyncFlatSpec tests into groups with tags like this:

import org.scalatest.AsyncFlatSpec
import org.scalatest.tagobjects.Slow
import scala.concurrent.Future

class AddSpec extends AsyncFlatSpec {
def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
"addSoon" should "eventually compute a sum of passed Ints" taggedAs(Slow) in { val futureSum: Future[Int] = addSoon(1, 2) // You can map assertions onto a Future, then return // the resulting Future[Assertion] to ScalaTest: futureSum map { sum => assert(sum == 3) } }
def addNow(addends: Int*): Int = addends.sum
"addNow" should "immediately compute a sum of passed Ints" taggedAs(Slow, DbTest) in { val sum: Int = addNow(1, 2) // You can also write synchronous tests. The body // must have result type Assertion: assert(sum == 3) } }

This code marks both tests with the org.scalatest.tags.Slow tag, and the second test with the com.mycompany.tags.DbTest tag.

The run method takes a Filter, whose constructor takes an optional Set[String] called tagsToInclude and a Set[String] called tagsToExclude. If tagsToInclude is None, all tests will be run except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is defined, only tests belonging to tags mentioned in the tagsToInclude set, and not mentioned in tagsToExclude, will be run.

It is recommended, though not required, that you create a corresponding tag annotation when you create a Tag object. A tag annotation (on the JVM, not Scala.js) allows you to tag all the tests of an AsyncFlatSpec in one stroke by annotating the class. For more information and examples, see the documentation for class Tag. On Scala.js, to tag all tests of a suite, you'll need to tag each test individually at the test site.

Shared fixtures

A test fixture is composed of the objects and other artifacts (files, sockets, database connections, etc.) tests use to do their work. When multiple tests need to work with the same fixtures, it is important to try and avoid duplicating the fixture code across those tests. The more code duplication you have in your tests, the greater drag the tests will have on refactoring the actual production code.

ScalaTest recommends three techniques to eliminate such code duplication in async styles:

  • Refactor using Scala
  • Override withFixture
  • Mix in a before-and-after trait

Each technique is geared towards helping you reduce code duplication without introducing instance vars, shared mutable objects, or other dependencies between tests. Eliminating shared mutable state across tests will make your test code easier to reason about and eliminate the need to synchronize access to shared mutable state on the JVM.

The following sections describe these techniques, including explaining the recommended usage for each. But first, here's a table summarizing the options:

Refactor using Scala when different tests need different fixtures.
get-fixture methods The extract method refactor helps you create a fresh instances of mutable fixture objects in each test that needs them, but doesn't help you clean them up when you're done.
loan-fixture methods Factor out dupicate code with the loan pattern when different tests need different fixtures that must be cleaned up afterwards.
Override withFixture when most or all tests need the same fixture.
withFixture(NoArgAsyncTest) The recommended default approach when most or all tests need the same fixture treatment. This general technique allows you, for example, to perform side effects at the beginning and end of all or most tests, transform the outcome of tests, retry tests, make decisions based on test names, tags, or other test data. Use this technique unless:
Different tests need different fixtures (refactor using Scala instead)
An exception in fixture code should abort the suite, not fail the test (use a before-and-after trait instead)
You have objects to pass into tests (override withFixture(OneArgAsyncTest) instead)
withFixture(OneArgAsyncTest) Use when you want to pass the same fixture object or objects as a parameter into all or most tests.
Mix in a before-and-after trait when you want an aborted suite, not a failed test, if the fixture code fails.
BeforeAndAfter Use this boilerplate-buster when you need to perform the same side-effects before and/or after tests, rather than at the beginning or end of tests.
BeforeAndAfterEach Use when you want to stack traits that perform the same side-effects before and/or after tests, rather than at the beginning or end of tests.

Calling get-fixture methods

If you need to create the same mutable fixture objects in multiple tests, and don't need to clean them up after using them, the simplest approach is to write one or more get-fixture methods. A get-fixture method returns a new instance of a needed fixture object (or a holder object containing multiple fixture objects) each time it is called. You can call a get-fixture method at the beginning of each test that needs the fixture, storing the returned object or objects in local variables. Here's an example:

package org.scalatest.examples.asyncflatspec.getfixture

import org.scalatest.AsyncFlatSpec import scala.concurrent.Future
class ExampleSpec extends AsyncFlatSpec {
def fixture: Future[String] = Future { "ScalaTest is " }
"Testing" should "be easy" in { val future = fixture val result = future map { s => s + "easy!" } result map { s => assert(s == "ScalaTest is easy!") } }
it should "be fun" in { val future = fixture val result = future map { s => s + "fun!" } result map { s => assert(s == "ScalaTest is fun!") } } }

If you need to configure fixture objects differently in different tests, you can pass configuration into the get-fixture method. For example, you could pass in an initial value for a fixture object as a parameter to the get-fixture method.

Overriding withFixture(NoArgAsyncTest)

Although the get-fixture method approach takes care of setting up a fixture at the beginning of each test, it doesn't address the problem of cleaning up a fixture at the end of the test. If you just need to perform a side-effect at the beginning or end of a test, and don't need to actually pass any fixture objects into the test, you can override withFixture(NoArgAsyncTest), a method defined in trait AsyncTestSuite, a supertrait of AsyncFlatSpec.

Trait AsyncFlatSpec's runTest method passes a no-arg async test function to withFixture(NoArgAsyncTest). It is withFixture's responsibility to invoke that test function. The default implementation of withFixture simply invokes the function and returns the result, like this:

// Default implementation in trait AsyncTestSuite
protected def withFixture(test: NoArgAsyncTest): FutureOutcome = {
  test()
}

You can, therefore, override withFixture to perform setup before invoking the test function, and/or perform cleanup after the test completes. The recommended way to ensure cleanup is performed after a test completes is to use the complete-lastly syntax, defined in supertrait CompleteLastly. The complete-lastly syntax will ensure that cleanup will occur whether future-producing code completes abruptly by throwing an exception, or returns normally yielding a future. In the latter case, complete-lastly will register the cleanup code to execute asynchronously when the future completes.

The withFixture method is designed to be stacked, and to enable this, you should always call the super implementation of withFixture, and let it invoke the test function rather than invoking the test function directly. In other words, instead of writing “test()”, you should write “super.withFixture(test)”, like this:

// Your implementation
override def withFixture(test: NoArgAsyncTest) = {

// Perform setup here
complete { super.withFixture(test) // Invoke the test function } lastly { // Perform cleanup here } }

If you have no cleanup to perform, you can write withFixture like this instead:

// Your implementation
override def withFixture(test: NoArgAsyncTest) = {

// Perform setup here
super.withFixture(test) // Invoke the test function }

If you want to perform an action only for certain outcomes, you'll need to register code performing that action as a callback on the Future using one of Future's registration methods: onComplete, onSuccess, or onFailure. Note that if a test fails, that will be treated as a scala.util.Success(org.scalatest.Failed). So if you want to perform an action if a test fails, for example, you'd register the callback using onSuccess.

Here's an example in which withFixture(NoArgAsyncTest) is used to take a snapshot of the working directory if a test fails, and send that information to the standard output stream:

package org.scalatest.examples.asyncflatspec.noargasynctest

import java.io.File import org.scalatest._ import scala.concurrent.Future
class ExampleSpec extends AsyncFlatSpec {
override def withFixture(test: NoArgAsyncTest) = {
super.withFixture(test) onFailedThen { _ => val currDir = new File(".") val fileNames = currDir.list() info("Dir snapshot: " + fileNames.mkString(", ")) } }
def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
"This test" should "succeed" in { addSoon(1, 1) map { sum => assert(sum == 2) } }
it should "fail" in { addSoon(1, 1) map { sum => assert(sum == 3) } } }

Running this version of ExampleSpec in the interpreter in a directory with two files, hello.txt and world.txt would give the following output:

scala> org.scalatest.run(new ExampleSpec)
ExampleSpec:
This test
- should succeed
- should fail *** FAILED ***
  2 did not equal 3 (:33)

Note that the NoArgAsyncTest passed to withFixture, in addition to an apply method that executes the test, also includes the test name and the config map passed to runTest. Thus you can also use the test name and configuration objects in your withFixture implementation.

Lastly, if you want to transform the outcome in some way in withFixture, you'll need to use either the map or transform methods of Future, like this:

// Your implementation
override def withFixture(test: NoArgAsyncTest) = {

// Perform setup here
val futureOutcome = super.withFixture(test) // Invoke the test function
futureOutcome change { outcome => // transform the outcome into a new outcome here } }

Note that a NoArgAsyncTest's apply method will return a scala.util.Failure only if the test completes abruptly with a "test-fatal" exception (such as OutOfMemoryError) that should cause the suite to abort rather than the test to fail. Thus usually you would use map to transform future outcomes, not transform, so that such test-fatal exceptions pass through unchanged. The suite will abort asynchronously with any exception returned from NoArgAsyncTest's apply method in a scala.util.Failure.

Calling loan-fixture methods

If you need to both pass a fixture object into a test and perform cleanup at the end of the test, you'll need to use the loan pattern. If different tests need different fixtures that require cleanup, you can implement the loan pattern directly by writing loan-fixture methods. A loan-fixture method takes a function whose body forms part or all of a test's code. It creates a fixture, passes it to the test code by invoking the function, then cleans up the fixture after the function returns.

The following example shows three tests that use two fixtures, a database and a file. Both require cleanup after, so each is provided via a loan-fixture method. (In this example, the database is simulated with a StringBuffer.)

package org.scalatest.examples.asyncflatspec.loanfixture

import java.util.concurrent.ConcurrentHashMap
import scala.concurrent.Future import scala.concurrent.ExecutionContext
object DbServer { // Simulating a database server type Db = StringBuffer private final val databases = new ConcurrentHashMap[String, Db] def createDb(name: String): Db = { val db = new StringBuffer // java.lang.StringBuffer is thread-safe databases.put(name, db) db } def removeDb(name: String): Unit = { databases.remove(name) } }
// Defining actor messages sealed abstract class StringOp case object Clear extends StringOp case class Append(value: String) extends StringOp case object GetValue
class StringActor { // Simulating an actor private final val sb = new StringBuilder def !(op: StringOp): Unit = synchronized { op match { case Append(value) => sb.append(value) case Clear => sb.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[String] = Future { synchronized { sb.toString } } }
import org.scalatest._ import DbServer._ import java.util.UUID.randomUUID
class ExampleSpec extends AsyncFlatSpec {
def withDatabase(testCode: Future[Db] => Future[Assertion]) = { val dbName = randomUUID.toString // generate a unique db name val futureDb = Future { createDb(dbName) } // create the fixture complete { val futurePopulatedDb = futureDb map { db => db.append("ScalaTest is ") // perform setup } testCode(futurePopulatedDb) // "loan" the fixture to the test code } lastly { removeDb(dbName) // ensure the fixture will be cleaned up } }
def withActor(testCode: StringActor => Future[Assertion]) = { val actor = new StringActor complete { actor ! Append("ScalaTest is ") // set up the fixture testCode(actor) // "loan" the fixture to the test code } lastly { actor ! Clear // ensure the fixture will be cleaned up } }
// This test needs the actor fixture "Testing" should "be productive" in { withActor { actor => actor ! Append("productive!") val futureString = actor ? GetValue futureString map { s => assert(s == "ScalaTest is productive!") } } }
// This test needs the database fixture "Test code" should "be readable" in { withDatabase { futureDb => futureDb map { db => db.append("readable!") assert(db.toString == "ScalaTest is readable!") } } }
// This test needs both the actor and the database it should "be clear and concise" in { withDatabase { futureDb => withActor { actor => // loan-fixture methods compose actor ! Append("concise!") val futureString = actor ? GetValue val futurePair: Future[(Db, String)] = futureDb zip futureString futurePair map { case (db, s) => db.append("clear!") assert(db.toString == "ScalaTest is clear!") assert(s == "ScalaTest is concise!") } } } } }

As demonstrated by the last test, loan-fixture methods compose. Not only do loan-fixture methods allow you to give each test the fixture it needs, they allow you to give a test multiple fixtures and clean everything up afterwards.

Also demonstrated in this example is the technique of giving each test its own "fixture sandbox" to play in. When your fixtures involve external side-effects, like creating databases, it is a good idea to give each database a unique name as is done in this example. This keeps tests completely isolated, allowing you to run them in parallel if desired.

Overriding withFixture(OneArgTest)

If all or most tests need the same fixture, you can avoid some of the boilerplate of the loan-fixture method approach by using a fixture.AsyncTestSuite and overriding withFixture(OneArgAsyncTest). Each test in a fixture.AsyncTestSuite takes a fixture as a parameter, allowing you to pass the fixture into the test. You must indicate the type of the fixture parameter by specifying FixtureParam, and implement a withFixture method that takes a OneArgAsyncTest. This withFixture method is responsible for invoking the one-arg async test function, so you can perform fixture set up before invoking and passing the fixture into the test function, and ensure clean up is performed after the test completes.

To enable the stacking of traits that define withFixture(NoArgAsyncTest), it is a good idea to let withFixture(NoArgAsyncTest) invoke the test function instead of invoking the test function directly. To do so, you'll need to convert the OneArgAsyncTest to a NoArgAsyncTest. You can do that by passing the fixture object to the toNoArgAsyncTest method of OneArgAsyncTest. In other words, instead of writing “test(theFixture)”, you'd delegate responsibility for invoking the test function to the withFixture(NoArgAsyncTest) method of the same instance by writing:

withFixture(test.toNoArgAsyncTest(theFixture))

Here's a complete example:

package org.scalatest.examples.asyncflatspec.oneargasynctest

import org.scalatest._ import scala.concurrent.Future import scala.concurrent.ExecutionContext
// Defining actor messages sealed abstract class StringOp case object Clear extends StringOp case class Append(value: String) extends StringOp case object GetValue
class StringActor { // Simulating an actor private final val sb = new StringBuilder def !(op: StringOp): Unit = synchronized { op match { case Append(value) => sb.append(value) case Clear => sb.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[String] = Future { synchronized { sb.toString } } }
class ExampleSpec extends fixture.AsyncFlatSpec {
type FixtureParam = StringActor
def withFixture(test: OneArgAsyncTest): FutureOutcome = {
val actor = new StringActor complete { actor ! Append("ScalaTest is ") // set up the fixture withFixture(test.toNoArgAsyncTest(actor)) } lastly { actor ! Clear // ensure the fixture will be cleaned up } }
"Testing" should "be easy" in { actor => actor ! Append("easy!") val futureString = actor ? GetValue futureString map { s => assert(s == "ScalaTest is easy!") } }
it should "be fun" in { actor => actor ! Append("fun!") val futureString = actor ? GetValue futureString map { s => assert(s == "ScalaTest is fun!") } } }

In this example, the tests required one fixture object, a StringActor. If your tests need multiple fixture objects, you can simply define the FixtureParam type to be a tuple containing the objects or, alternatively, a case class containing the objects. For more information on the withFixture(OneArgAsyncTest) technique, see the documentation for fixture.AsyncFlatSpec.

Mixing in BeforeAndAfter

In all the shared fixture examples shown so far, the activities of creating, setting up, and cleaning up the fixture objects have been performed during the test. This means that if an exception occurs during any of these activities, it will be reported as a test failure. Sometimes, however, you may want setup to happen before the test starts, and cleanup after the test has completed, so that if an exception occurs during setup or cleanup, the entire suite aborts and no more tests are attempted. The simplest way to accomplish this in ScalaTest is to mix in trait BeforeAndAfter. With this trait you can denote a bit of code to run before each test with before and/or after each test each test with after, like this:

package org.scalatest.examples.asyncflatspec.beforeandafter

import org.scalatest.AsyncFlatSpec import org.scalatest.BeforeAndAfter import scala.concurrent.Future import scala.concurrent.ExecutionContext
// Defining actor messages sealed abstract class StringOp case object Clear extends StringOp case class Append(value: String) extends StringOp case object GetValue
class StringActor { // Simulating an actor private final val sb = new StringBuilder def !(op: StringOp): Unit = synchronized { op match { case Append(value) => sb.append(value) case Clear => sb.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[String] = Future { synchronized { sb.toString } } }
class ExampleSpec extends AsyncFlatSpec with BeforeAndAfter {
final val actor = new StringActor
before { actor ! Append("ScalaTest is ") // set up the fixture }
after { actor ! Clear // clean up the fixture }
"Testing" should "be easy" in { actor ! Append("easy!") val futureString = actor ? GetValue futureString map { s => assert(s == "ScalaTest is easy!") } }
it should "be fun" in { actor ! Append("fun!") val futureString = actor ? GetValue futureString map { s => assert(s == "ScalaTest is fun!") } } }

Note that the only way before and after code can communicate with test code is via some side-effecting mechanism, commonly by reassigning instance vars or by changing the state of mutable objects held from instance vals (as in this example). If using instance vars or mutable objects held from instance vals you wouldn't be able to run tests in parallel in the same instance of the test class (on the JVM, not Scala.js) unless you synchronized access to the shared, mutable state.

Note that on the JVM, if you override ScalaTest's default serial execution context, you will likely need to worry about synchronizing access to shared mutable fixture state, because the execution context may assign different threads to process different Future transformations. Although access to mutable state along the same linear chain of Future transformations need not be synchronized, it can be difficult to spot cases where these constraints are violated. The best approach is to use only immutable objects when transforming Futures. When that's not practical, involve only thread-safe mutable objects, as is done in the above example. On Scala.js, by contrast, you need not worry about thread synchronization, because in effect only one thread exists.

Although BeforeAndAfter provides a minimal-boilerplate way to execute code before and after tests, it isn't designed to enable stackable traits, because the order of execution would be non-obvious. If you want to factor out before and after code that is common to multiple test suites, you should use trait BeforeAndAfterEach instead, as shown later in the next section, composing fixtures by stacking traits.

Composing fixtures by stacking traits

In larger projects, teams often end up with several different fixtures that test classes need in different combinations, and possibly initialized (and cleaned up) in different orders. A good way to accomplish this in ScalaTest is to factor the individual fixtures into traits that can be composed using the stackable trait pattern. This can be done, for example, by placing withFixture methods in several traits, each of which call super.withFixture. Here's an example in which the StringBuilderActor and StringBufferActor fixtures used in the previous examples have been factored out into two stackable fixture traits named Builder and Buffer:

package org.scalatest.examples.asyncflatspec.composingwithasyncfixture

import org.scalatest._ import org.scalatest.SuiteMixin import collection.mutable.ListBuffer import scala.concurrent.Future import scala.concurrent.ExecutionContext
// Defining actor messages sealed abstract class StringOp case object Clear extends StringOp case class Append(value: String) extends StringOp case object GetValue
class StringBuilderActor { // Simulating an actor private final val sb = new StringBuilder def !(op: StringOp): Unit = synchronized { op match { case Append(value) => sb.append(value) case Clear => sb.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[String] = Future { synchronized { sb.toString } } }
class StringBufferActor { private final val buf = ListBuffer.empty[String] def !(op: StringOp): Unit = synchronized { op match { case Append(value) => buf += value case Clear => buf.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[List[String]] = Future { synchronized { buf.toList } } }
trait Builder extends AsyncTestSuiteMixin { this: AsyncTestSuite =>
final val builderActor = new StringBuilderActor
abstract override def withFixture(test: NoArgAsyncTest) = { builderActor ! Append("ScalaTest is ") complete { super.withFixture(test) // To be stackable, must call super.withFixture } lastly { builderActor ! Clear } } }
trait Buffer extends AsyncTestSuiteMixin { this: AsyncTestSuite =>
final val bufferActor = new StringBufferActor
abstract override def withFixture(test: NoArgAsyncTest) = { complete { super.withFixture(test) // To be stackable, must call super.withFixture } lastly { bufferActor ! Clear } } }
class ExampleSpec extends AsyncFlatSpec with Builder with Buffer {
"Testing" should "be easy" in { builderActor ! Append("easy!") val futureString = builderActor ? GetValue val futureList = bufferActor ? GetValue val futurePair: Future[(String, List[String])] = futureString zip futureList futurePair map { case (str, lst) => assert(str == "ScalaTest is easy!") assert(lst.isEmpty) bufferActor ! Append("sweet") succeed } }
it should "be fun" in { builderActor ! Append("fun!") val futureString = builderActor ? GetValue val futureList = bufferActor ? GetValue val futurePair: Future[(String, List[String])] = futureString zip futureList futurePair map { case (str, lst) => assert(str == "ScalaTest is fun!") assert(lst.isEmpty) bufferActor ! Append("awesome") succeed } } }

By mixing in both the Builder and Buffer traits, ExampleSpec gets both fixtures, which will be initialized before each test and cleaned up after. The order the traits are mixed together determines the order of execution. In this case, Builder is “super” to Buffer. If you wanted Buffer to be “super” to Builder, you need only switch the order you mix them together, like this:

class Example2Spec extends AsyncFlatSpec with Buffer with Builder

If you only need one fixture you mix in only that trait:

class Example3Spec extends AsyncFlatSpec with Builder

Another way to create stackable fixture traits is by extending the BeforeAndAfterEach and/or BeforeAndAfterAll traits. BeforeAndAfterEach has a beforeEach method that will be run before each test (like JUnit's setUp), and an afterEach method that will be run after (like JUnit's tearDown). Similarly, BeforeAndAfterAll has a beforeAll method that will be run before all tests, and an afterAll method that will be run after all tests. Here's what the previously shown example would look like if it were rewritten to use the BeforeAndAfterEach methods instead of withFixture:

package org.scalatest.examples.asyncflatspec.composingbeforeandaftereach

import org.scalatest._ import org.scalatest.BeforeAndAfterEach import collection.mutable.ListBuffer import scala.concurrent.Future import scala.concurrent.ExecutionContext
// Defining actor messages sealed abstract class StringOp case object Clear extends StringOp case class Append(value: String) extends StringOp case object GetValue
class StringBuilderActor { // Simulating an actor private final val sb = new StringBuilder def !(op: StringOp): Unit = synchronized { op match { case Append(value) => sb.append(value) case Clear => sb.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[String] = Future { synchronized { sb.toString } } }
class StringBufferActor { private final val buf = ListBuffer.empty[String] def !(op: StringOp): Unit = synchronized { op match { case Append(value) => buf += value case Clear => buf.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[List[String]] = Future { synchronized { buf.toList } } }
trait Builder extends BeforeAndAfterEach { this: Suite =>
final val builderActor = new StringBuilderActor
override def beforeEach() { builderActor ! Append("ScalaTest is ") super.beforeEach() // To be stackable, must call super.beforeEach }
override def afterEach() { try super.afterEach() // To be stackable, must call super.afterEach finally builderActor ! Clear } }
trait Buffer extends BeforeAndAfterEach { this: Suite =>
final val bufferActor = new StringBufferActor
override def afterEach() { try super.afterEach() // To be stackable, must call super.afterEach finally bufferActor ! Clear } }
class ExampleSpec extends AsyncFlatSpec with Builder with Buffer {
"Testing" should "be easy" in { builderActor ! Append("easy!") val futureString = builderActor ? GetValue val futureList = bufferActor ? GetValue val futurePair: Future[(String, List[String])] = futureString zip futureList futurePair map { case (str, lst) => assert(str == "ScalaTest is easy!") assert(lst.isEmpty) bufferActor ! Append("sweet") succeed } }
it should "be fun" in { builderActor ! Append("fun!") val futureString = builderActor ? GetValue val futureList = bufferActor ? GetValue val futurePair: Future[(String, List[String])] = futureString zip futureList futurePair map { case (str, lst) => assert(str == "ScalaTest is fun!") assert(lst.isEmpty) bufferActor ! Append("awesome") succeed } } }

To get the same ordering as withFixture, place your super.beforeEach call at the end of each beforeEach method, and the super.afterEach call at the beginning of each afterEach method, as shown in the previous example. It is a good idea to invoke super.afterEach in a try block and perform cleanup in a finally clause, as shown in the previous example, because this ensures the cleanup code is performed even if super.afterEach throws an exception.

The difference between stacking traits that extend BeforeAndAfterEach versus traits that implement withFixture is that setup and cleanup code happens before and after the test in BeforeAndAfterEach, but at the beginning and end of the test in withFixture. Thus if a withFixture method completes abruptly with an exception, it is considered a failed test. By contrast, if any of the beforeEach or afterEach methods of BeforeAndAfterEach complete abruptly, it is considered an aborted suite, which will result in a SuiteAborted event.

Shared tests

Sometimes you may want to run the same test code on different fixture objects. In other words, you may want to write tests that are "shared" by different fixture objects. To accomplish this in an AsyncFlatSpec, you first place shared tests in behavior functions. These behavior functions will be invoked during the construction phase of any AsyncFlatSpec that uses them, so that the tests they contain will be registered as tests in that AsyncFlatSpec. For example, given this StackActor class:

package org.scalatest.examples.asyncflatspec.sharedtests

import scala.collection.mutable.ListBuffer import scala.concurrent.Future import scala.concurrent.ExecutionContext
// Stack operations case class Push[T](value: T) sealed abstract class StackOp case object Pop extends StackOp case object Peek extends StackOp case object Size extends StackOp
// Stack info case class StackInfo[T](top: Option[T], size: Int, max: Int) { require(size > 0, "size was less than zero") require(max > size, "max was less than size") val isFull: Boolean = size == max val isEmpty: Boolean = size == 0 }
class StackActor[T](Max: Int, name: String) {
private final val buf = new ListBuffer[T]
def !(push: Push[T]): Unit = synchronized { if (buf.size != Max) buf.prepend(push.value) else throw new IllegalStateException("can't push onto a full stack") }
def ?(op: StackOp)(implicit c: ExecutionContext): Future[StackInfo[T]] = synchronized { op match { case Pop => Future { if (buf.size != 0) StackInfo(Some(buf.remove(0)), buf.size, Max) else throw new IllegalStateException("can't pop an empty stack") } case Peek => Future { if (buf.size != 0) StackInfo(Some(buf(0)), buf.size, Max) else throw new IllegalStateException("can't peek an empty stack") } case Size => Future { StackInfo(None, buf.size, Max) } } }
override def toString: String = name }

You may want to test the stack represented by the StackActor class in different states: empty, full, with one item, with one item less than capacity, etc. You may find you have several tests that make sense any time the stack is non-empty. Thus you'd ideally want to run those same tests for three stack fixture objects: a full stack, a stack with a one item, and a stack with one item less than capacity. With shared tests, you can factor these tests out into a behavior function, into which you pass the stack fixture to use when running the tests. So in your AsyncFlatSpec for StackActor, you'd invoke the behavior function three times, passing in each of the three stack fixtures so that the shared tests are run for all three fixtures.

You can define a behavior function that encapsulates these shared tests inside the AsyncFlatSpec that uses them. If they are shared between different AsyncFlatSpecs, however, you could also define them in a separate trait that is mixed into each AsyncFlatSpec that uses them. For example, here the nonEmptyStackActor behavior function (in this case, a behavior method) is defined in a trait along with another method containing shared tests for non-full stacks:

import org.scalatest.AsyncFlatSpec

trait AsyncFlatSpecStackBehaviors { this: AsyncFlatSpec =>
def nonEmptyStackActor(createNonEmptyStackActor: => StackActor[Int], lastItemAdded: Int, name: String): Unit = {
it should ("return non-empty StackInfo when Size is fired at non-empty stack actor: " + name) in { val stackActor = createNonEmptyStackActor val futureStackInfo = stackActor ? Size futureStackInfo map { stackInfo => assert(!stackInfo.isEmpty) } }
it should ("return before and after StackInfo that has existing size and lastItemAdded as top when Peek is fired at non-empty stack actor: " + name) in { val stackActor = createNonEmptyStackActor val futurePair: Future[(StackInfo[Int], StackInfo[Int])] = for { beforePeek <- stackActor ? Size afterPeek <- stackActor ? Peek } yield (beforePeek, afterPeek) futurePair map { case (beforePeek, afterPeek) => assert(afterPeek.top == Some(lastItemAdded)) assert(afterPeek.size == beforePeek.size) } }
it should ("return before and after StackInfo that has existing size - 1 and lastItemAdded as top when Pop is fired at non-empty stack actor: " + name) in { val stackActor = createNonEmptyStackActor val futurePair: Future[(StackInfo[Int], StackInfo[Int])] = for { beforePop <- stackActor ? Size afterPop <- stackActor ? Pop } yield (beforePop, afterPop) futurePair map { case (beforePop, afterPop) => assert(afterPop.top == Some(lastItemAdded)) assert(afterPop.size == beforePop.size - 1) } } }
def nonFullStackActor(createNonFullStackActor: => StackActor[Int], name: String): Unit = {
it should ("return non-full StackInfo when Size is fired at non-full stack actor: " + name) in { val stackActor = createNonFullStackActor val futureStackInfo = stackActor ? Size futureStackInfo map { stackInfo => assert(!stackInfo.isFull) } }
it should ("return before and after StackInfo that has existing size + 1 and new item as top when Push is fired at non-full stack actor: " + name) in { val stackActor = createNonFullStackActor val futurePair: Future[(StackInfo[Int], StackInfo[Int])] = for { beforePush <- stackActor ? Size afterPush <- { stackActor ! Push(7); stackActor ? Peek } } yield (beforePush, afterPush) futurePair map { case (beforePush, afterPush) => assert(afterPush.top == Some(7)) assert(afterPush.size == beforePush.size + 1) } } } }

Given these behavior functions, you could invoke them directly, but AsyncFlatSpec offers a DSL for the purpose, which looks like this:

it should behave like nonEmptyStackActor(almostEmptyStackActor, LastValuePushed, almostEmptyStackActorName)
it should behave like nonFullStackActor(almostEmptyStackActor, almostEmptyStackActorName)

Here's an example:

class StackSpec extends AsyncFlatSpec with AsyncFlatSpecStackBehaviors {

val Max = 10 val LastValuePushed = Max - 1
// Stack fixture creation methods val emptyStackActorName = "empty stack actor" def emptyStackActor = new StackActor[Int](Max, emptyStackActorName )
val fullStackActorName = "full stack actor" def fullStackActor = { val stackActor = new StackActor[Int](Max, fullStackActorName ) for (i <- 0 until Max) stackActor ! Push(i) stackActor }
val almostEmptyStackActorName = "almost empty stack actor" def almostEmptyStackActor = { val stackActor = new StackActor[Int](Max, almostEmptyStackActorName ) stackActor ! Push(LastValuePushed) stackActor }
val almostFullStackActorName = "almost full stack actor" def almostFullStackActor = { val stackActor = new StackActor[Int](Max, almostFullStackActorName) for (i <- 1 to LastValuePushed) stackActor ! Push(i) stackActor }
"A Stack actor (when empty)" should "return empty StackInfo when Size is fired at it" in { val stackActor = emptyStackActor val futureStackInfo = stackActor ? Size futureStackInfo map { stackInfo => assert(stackInfo.isEmpty) } }
it should "complain when Peek is fired at it" in { recoverToSucceededIf[IllegalStateException] { emptyStackActor ? Peek } }
it should "complain when Pop is fired at it" in { recoverToSucceededIf[IllegalStateException] { emptyStackActor ? Pop } }
"A Stack actor (when non-empty)" should behave like nonEmptyStackActor(almostEmptyStackActor, LastValuePushed, almostEmptyStackActorName)
it should behave like nonFullStackActor(almostEmptyStackActor, almostEmptyStackActorName)
it should behave like nonEmptyStackActor(almostFullStackActor, LastValuePushed, almostFullStackActorName)
it should behave like nonFullStackActor(almostFullStackActor, almostFullStackActorName)
"A Stack actor (when full)" should "return full StackInfo when Size is fired at it" in { val stackActor = fullStackActor val futureStackInfo = stackActor ? Size futureStackInfo map { stackInfo => assert(stackInfo.isFull) } }
it should behave like nonEmptyStackActor(fullStackActor, LastValuePushed, fullStackActorName)
it should "complain when Push is fired at it" in { val stackActor = fullStackActor assertThrows[IllegalStateException] { stackActor ! Push(10) } } }

If you load these classes into the Scala interpreter (with scalatest's JAR file on the class path), and execute it, you'll see:

scala> org.scalatest.run(new StackSpec)
StackSpec:
A Stack actor (when empty)
- should return empty StackInfo when Size is fired at it
- should complain when Peek is fired at it
- should complain when Pop is fired at it
A Stack actor (when non-empty)
- should return non-empty StackInfo when Size is fired at non-empty stack actor: almost empty stack actor
- should return before and after StackInfo that has existing size and lastItemAdded as top when Peek is fired at non-empty stack actor: almost empty stack actor
- should return before and after StackInfo that has existing size - 1 and lastItemAdded as top when Pop is fired at non-empty stack actor: almost empty stack actor
- should return non-full StackInfo when Size is fired at non-full stack actor: almost empty stack actor
- should return before and after StackInfo that has existing size + 1 and new item as top when Push is fired at non-full stack actor: almost empty stack actor
- should return non-empty StackInfo when Size is fired at non-empty stack actor: almost full stack actor
- should return before and after StackInfo that has existing size and lastItemAdded as top when Peek is fired at non-empty stack actor: almost full stack actor
- should return before and after StackInfo that has existing size - 1 and lastItemAdded as top when Pop is fired at non-empty stack actor: almost full stack actor
- should return non-full StackInfo when Size is fired at non-full stack actor: almost full stack actor
- should return before and after StackInfo that has existing size + 1 and new item as top when Push is fired at non-full stack actor: almost full stack actor
A Stack actor (when full)
- should return full StackInfo when Size is fired at it
- should return non-empty StackInfo when Size is fired at non-empty stack actor: full stack actor
- should return before and after StackInfo that has existing size and lastItemAdded as top when Peek is fired at non-empty stack actor: full stack actor
- should return before and after StackInfo that has existing size - 1 and lastItemAdded as top when Pop is fired at non-empty stack actor: full stack actor
- should complain when Push is fired at it

One thing to keep in mind when using shared tests is that in ScalaTest, each test in a suite must have a unique name. If you register the same tests repeatedly in the same suite, one problem you may encounter is an exception at runtime complaining that multiple tests are being registered with the same test name. Although in an AsyncFlatSpec, the behavior of clause is a nesting construct analogous to AsyncFunSpec's describe clause, you many sometimes need to do a bit of extra work to ensure that the test names are unique. If a duplicate test name problem shows up in an AsyncFlatSpec, you'll need to pass in a prefix or suffix string to add to each test name. You can call toString on the shared fixture object, or pass this string the same way you pass any other data needed by the shared tests. This is the approach taken by the previous AsyncFlatSpecStackBehaviors example.

Given this AsyncFlatSpecStackBehaviors trait, calling it with the almostEmptyStackActor fixture, like this:

"A Stack actor (when non-empty)" should behave like nonEmptyStackActor(almostEmptyStackActor, LastValuePushed, almostEmptyStackActorName)

yields test names:

  • A Stack actor (when non-empty) should return non-empty StackInfo when Size is fired at non-empty stack actor: almost empty stack actor
  • A Stack actor (when non-empty) should return before and after StackInfo that has existing size and lastItemAdded as top when Peek is fired at non-empty stack actor: almost empty stack actor
  • A Stack actor (when non-empty) should return before and after StackInfo that has existing size - 1 and lastItemAdded as top when Pop is fired at non-empty stack actor: almost empty stack actor

Whereas calling it with the almostFullStackActor fixture, like this:

it should behave like nonEmptyStackActor(almostFullStackActor, LastValuePushed, almostFullStackActorName)

yields different test names:

  • A Stack actor (when non-empty) should return non-empty StackInfo when Size is fired at non-empty stack actor: almost full stack actor
  • A Stack actor (when non-empty) should return before and after StackInfo that has existing size and lastItemAdded as top when Peek is fired at non-empty stack actor: almost full stack actor
  • A Stack actor (when non-empty) should return before and after StackInfo that has existing size - 1 and lastItemAdded as top when Pop is fired at non-empty stack actor: almost full stack actor
Source
AsyncFlatSpec.scala
Linear Supertypes
Ordering
  1. Alphabetic
  2. By Inheritance
Inherited
  1. AsyncFlatSpec
  2. AsyncFlatSpecLike
  3. Documenting
  4. Alerting
  5. Notifying
  6. Informing
  7. CanVerb
  8. MustVerb
  9. ShouldVerb
  10. AsyncTestRegistration
  11. AsyncTestSuite
  12. CompleteLastly
  13. RecoverMethods
  14. Suite
  15. Serializable
  16. Serializable
  17. Assertions
  18. TripleEquals
  19. TripleEqualsSupport
  20. AnyRef
  21. Any
  1. Hide All
  2. Show All
Visibility
  1. Public
  2. All

Instance Constructors

  1. new AsyncFlatSpec()

Type Members

  1. class AssertionsHelper extends AnyRef

    Helper class used by code generated by the assert macro.

    Helper class used by code generated by the assert macro.

    Definition Classes
    Assertions
  2. class CheckingEqualizer[L] extends AnyRef
    Definition Classes
    TripleEqualsSupport
  3. class Equalizer[L] extends AnyRef
    Definition Classes
    TripleEqualsSupport
  4. final class BehaviorWord extends AnyRef

    Class that supports the registration of a “subject” being specified and tested via the instance referenced from FlatSpec's behavior field.

    Class that supports the registration of a “subject” being specified and tested via the instance referenced from FlatSpec's behavior field.

    This field enables syntax such as the following subject registration:

    behavior of "A Stack"
    ^
    

    For more information and examples of the use of the behavior field, see the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  5. final class IgnoreVerbString extends AnyRef

    Class that supports registration of ignored tests via the IgnoreWord instance referenced from FlatSpec's ignore field.

    Class that supports registration of ignored tests via the IgnoreWord instance referenced from FlatSpec's ignore field.

    This class enables syntax such as the following registration of an ignored test:

    ignore should "pop values in last-in-first-out order" in { ... }
                                                          ^
    

    In addition, it enables syntax such as the following registration of an ignored, pending test:

    ignore should "pop values in last-in-first-out order" is (pending)
                                                          ^
    

    Note: the is method is provided for completeness and design symmetry, given there's no way to prevent changing is to ignore and marking a pending test as ignored that way. Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.

    And finally, it also enables syntax such as the following ignored, tagged test registration:

    ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                          ^
    

    For more information and examples of the use of the ignore field, see the Ignored tests section in the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  6. final class IgnoreVerbStringTaggedAs extends AnyRef

    Class that supports registration of ignored, tagged tests via the IgnoreWord instance referenced from FlatSpec's ignore field.

    Class that supports registration of ignored, tagged tests via the IgnoreWord instance referenced from FlatSpec's ignore field.

    This class enables syntax such as the following registration of an ignored, tagged test:

    ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                                             ^
    

    In addition, it enables syntax such as the following registration of an ignored, tagged, pending test:

    ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
                                                                             ^
    

    Note: the is method is provided for completeness and design symmetry, given there's no way to prevent changing is to ignore and marking a pending test as ignored that way. Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.

    For more information and examples of the use of the ignore field, see the Ignored tests section in the main documentation for trait FlatSpec. For examples of tagged test registration, see the Tagging tests section in the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  7. final class IgnoreWord extends AnyRef

    Class that supports registration of ignored tests via the ItWord instance referenced from FlatSpec's ignore field.

    Class that supports registration of ignored tests via the ItWord instance referenced from FlatSpec's ignore field.

    This class enables syntax such as the following registration of an ignored test:

    ignore should "pop values in last-in-first-out order" in { ... }
    ^
    

    For more information and examples of the use of the ignore field, see Ignored tests section in the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  8. final class InAndIgnoreMethods extends AnyRef

    Class that supports test registration in shorthand form.

    Class that supports test registration in shorthand form.

    For example, this class enables syntax such as the following test registration in shorthand form:

    "A Stack (when empty)" should "be empty" in { ... }
                                             ^
    

    This class also enables syntax such as the following ignored test registration in shorthand form:

    "A Stack (when empty)" should "be empty" ignore { ... }
                                             ^
    

    This class is used via an implicit conversion (named convertToInAndIgnoreMethods) from ResultOfStringPassedToVerb. The ResultOfStringPassedToVerb class does not declare any methods named in, because the type passed to in differs in a FlatSpec and a fixture.FlatSpec. A fixture.FlatSpec needs two in methods, one that takes a no-arg test function and another that takes a one-arg test function (a test that takes a Fixture as its parameter). By constrast, a FlatSpec needs only one in method that takes a by-name parameter. As a result, FlatSpec and fixture.FlatSpec each provide an implicit conversion from ResultOfStringPassedToVerb to a type that provides the appropriate in methods.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  9. final class InAndIgnoreMethodsAfterTaggedAs extends AnyRef

    Class that supports tagged test registration in shorthand form.

    Class that supports tagged test registration in shorthand form.

    For example, this class enables syntax such as the following tagged test registration in shorthand form:

    "A Stack (when empty)" should "be empty" taggedAs() in { ... }
                                                        ^
    

    This class also enables syntax such as the following tagged, ignored test registration in shorthand form:

    "A Stack (when empty)" should "be empty" taggedAs(SlowTest) ignore { ... }
                                                                ^
    

    This class is used via an implicit conversion (named convertToInAndIgnoreMethodsAfterTaggedAs) from ResultOfTaggedAsInvocation. The ResultOfTaggedAsInvocation class does not declare any methods named in, because the type passed to in differs in a FlatSpec and a fixture.FlatSpec. A fixture.FlatSpec needs two in methods, one that takes a no-arg test function and another that takes a one-arg test function (a test that takes a Fixture as its parameter). By constrast, a FlatSpec needs only one in method that takes a by-name parameter. As a result, FlatSpec and fixture.FlatSpec each provide an implicit conversion from ResultOfTaggedAsInvocation to a type that provides the appropriate in methods.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  10. final class ItVerbString extends AnyRef

    Class that supports test registration via the ItWord instance referenced from FlatSpec's it field.

    Class that supports test registration via the ItWord instance referenced from FlatSpec's it field.

    This class enables syntax such as the following test registration:

    it should "pop values in last-in-first-out order" in { ... }
                                                      ^
    

    It also enables syntax such as the following registration of an ignored test:

    it should "pop values in last-in-first-out order" ignore { ... }
                                                      ^
    

    In addition, it enables syntax such as the following registration of a pending test:

    it should "pop values in last-in-first-out order" is (pending)
                                                      ^
    

    And finally, it also enables syntax such as the following tagged test registration:

    it should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                      ^
    

    For more information and examples of the use of the it field, see the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  11. final class ItVerbStringTaggedAs extends AnyRef

    Class that supports the registration of tagged tests via the ItWord instance referenced from FlatSpec's it field.

    Class that supports the registration of tagged tests via the ItWord instance referenced from FlatSpec's it field.

    This class enables syntax such as the following tagged test registration:

    it should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                                         ^
    

    It also enables syntax such as the following registration of an ignored, tagged test:

    it should "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { ... }
                                                                         ^
    

    In addition, it enables syntax such as the following registration of a pending, tagged test:

    it should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
                                                                         ^
    

    For more information and examples of the use of the it field to register tagged tests, see the Tagging tests section in the main documentation for trait FlatSpec. For examples of tagged test registration, see the Tagging tests section in the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  12. final class ItWord extends AnyRef

    Class that supports test (and shared test) registration via the instance referenced from FlatSpec's it field.

    Class that supports test (and shared test) registration via the instance referenced from FlatSpec's it field.

    This class enables syntax such as the following test registration:

    it should "pop values in last-in-first-out order" in { ... }
    ^
    

    It also enables syntax such as the following shared test registration:

    it should behave like nonEmptyStack(lastItemPushed)
    ^
    

    For more information and examples of the use of the it field, see the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  13. final class TheyVerbString extends AnyRef

    Class that supports test registration via the TheyWord instance referenced from FlatSpec's they field.

    Class that supports test registration via the TheyWord instance referenced from FlatSpec's they field.

    This class enables syntax such as the following test registration:

    they should "pop values in last-in-first-out order" in { ... }
                                                        ^
    

    It also enables syntax such as the following registration of an ignored test:

    they should "pop values in last-in-first-out order" ignore { ... }
                                                        ^
    

    In addition, it enables syntax such as the following registration of a pending test:

    they should "pop values in last-in-first-out order" is (pending)
                                                        ^
    

    And finally, it also enables syntax such as the following tagged test registration:

    they should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                        ^
    

    For more information and examples of the use of the it field, see the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  14. final class TheyVerbStringTaggedAs extends AnyRef

    Class that supports the registration of tagged tests via the TheyWord instance referenced from FlatSpec's they field.

    Class that supports the registration of tagged tests via the TheyWord instance referenced from FlatSpec's they field.

    This class enables syntax such as the following tagged test registration:

    they should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                                           ^
    

    It also enables syntax such as the following registration of an ignored, tagged test:

    they should "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { ... }
                                                                           ^
    

    In addition, it enables syntax such as the following registration of a pending, tagged test:

    they should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
                                                                           ^
    

    For more information and examples of the use of the they field to register tagged tests, see the Tagging tests section in the main documentation for trait FlatSpec. For examples of tagged test registration, see the Tagging tests section in the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  15. final class TheyWord extends AnyRef

    Class that supports test (and shared test) registration via the instance referenced from FlatSpec's it field.

    Class that supports test (and shared test) registration via the instance referenced from FlatSpec's it field.

    This class enables syntax such as the following test registration:

    they should "pop values in last-in-first-out order" in { ... }
    ^
    

    It also enables syntax such as the following shared test registration:

    they should behave like nonEmptyStack(lastItemPushed)
    ^
    

    For more information and examples of the use of the it field, see the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  16. trait NoArgAsyncTest extends () ⇒ FutureOutcome with TestData

    A test function taking no arguments and returning a FutureOutcome.

    A test function taking no arguments and returning a FutureOutcome.

    For more detail and examples, see the relevant section in the documentation for trait AsyncFlatSpec.

    Definition Classes
    AsyncTestSuite
  17. class ResultOfCompleteInvocation[T] extends AnyRef

    Class that provides the lastly method of the complete-lastly syntax.

    Class that provides the lastly method of the complete-lastly syntax.

    Definition Classes
    CompleteLastly
  18. trait StringCanWrapperForVerb extends AnyRef

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class is used in conjunction with an implicit conversion to enable can methods to be invoked on Strings.

    Definition Classes
    CanVerb
  19. trait StringMustWrapperForVerb extends AnyRef

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class is used in conjunction with an implicit conversion to enable must methods to be invoked on Strings.

    Definition Classes
    MustVerb
  20. trait StringShouldWrapperForVerb extends AnyRef

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class is used in conjunction with an implicit conversion to enable should methods to be invoked on Strings.

    Definition Classes
    ShouldVerb

Value Members

  1. final def !=(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  2. def !==[T](right: Spread[T]): TripleEqualsInvocationOnSpread[T]
    Definition Classes
    TripleEqualsSupport
  3. def !==(right: Null): TripleEqualsInvocation[Null]
    Definition Classes
    TripleEqualsSupport
  4. def !==[T](right: T): TripleEqualsInvocation[T]
    Definition Classes
    TripleEqualsSupport
  5. final def ##(): Int
    Definition Classes
    AnyRef → Any
  6. final def ==(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  7. def ===[T](right: Spread[T]): TripleEqualsInvocationOnSpread[T]
    Definition Classes
    TripleEqualsSupport
  8. def ===(right: Null): TripleEqualsInvocation[Null]
    Definition Classes
    TripleEqualsSupport
  9. def ===[T](right: T): TripleEqualsInvocation[T]
    Definition Classes
    TripleEqualsSupport
  10. def alert: Alerter

    Returns an Alerter that during test execution will forward strings passed to its apply method to the current reporter.

    Returns an Alerter that during test execution will forward strings passed to its apply method to the current reporter. If invoked in a constructor, it will register the passed string for forwarding later during test execution. If invoked while this FlatSpec is being executed, such as from inside a test function, it will forward the information to the current reporter immediately. If invoked at any other time, it will print to the standard output. This method can be called safely by any thread.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLikeAlerting
  11. final def asInstanceOf[T0]: T0
    Definition Classes
    Any
  12. macro def assert(condition: Boolean, clue: Any)(implicit prettifier: Prettifier, pos: Position): Assertion

    Assert that a boolean condition, described in String message, is true.

    Assert that a boolean condition, described in String message, is true. If the condition is true, this method returns normally. Else, it throws TestFailedException with a helpful error message appended with the String obtained by invoking toString on the specified clue as the exception's detail message.

    This method is implemented in terms of a Scala macro that will generate a more helpful error message for expressions of this form:

    • assert(a == b, "a good clue")
    • assert(a != b, "a good clue")
    • assert(a === b, "a good clue")
    • assert(a !== b, "a good clue")
    • assert(a > b, "a good clue")
    • assert(a >= b, "a good clue")
    • assert(a < b, "a good clue")
    • assert(a <= b, "a good clue")
    • assert(a startsWith "prefix", "a good clue")
    • assert(a endsWith "postfix", "a good clue")
    • assert(a contains "something", "a good clue")
    • assert(a eq b, "a good clue")
    • assert(a ne b, "a good clue")
    • assert(a > 0 && b > 5, "a good clue")
    • assert(a > 0 || b > 5, "a good clue")
    • assert(a.isEmpty, "a good clue")
    • assert(!a.isEmpty, "a good clue")
    • assert(a.isInstanceOf[String], "a good clue")
    • assert(a.length == 8, "a good clue")
    • assert(a.size == 8, "a good clue")
    • assert(a.exists(_ == 8), "a good clue")

    At this time, any other form of expression will just get a TestFailedException with message saying the given expression was false. In the future, we will enhance this macro to give helpful error messages in more situations. In ScalaTest 2.0, however, this behavior was sufficient to allow the === that returns Boolean to be the default in tests. This makes === consistent between tests and production code.

    condition

    the boolean condition to assert

    clue

    An objects whose toString method returns a message to include in a failure report.

    Definition Classes
    Assertions
    Exceptions thrown

    NullArgumentException if message is null.

    TestFailedException if the condition is false.

  13. macro def assert(condition: Boolean)(implicit prettifier: Prettifier, pos: Position): Assertion

    Assert that a boolean condition is true.

    Assert that a boolean condition is true. If the condition is true, this method returns normally. Else, it throws TestFailedException.

    This method is implemented in terms of a Scala macro that will generate a more helpful error message for expressions of this form:

    • assert(a == b)
    • assert(a != b)
    • assert(a === b)
    • assert(a !== b)
    • assert(a > b)
    • assert(a >= b)
    • assert(a < b)
    • assert(a <= b)
    • assert(a startsWith "prefix")
    • assert(a endsWith "postfix")
    • assert(a contains "something")
    • assert(a eq b)
    • assert(a ne b)
    • assert(a > 0 && b > 5)
    • assert(a > 0 || b > 5)
    • assert(a.isEmpty)
    • assert(!a.isEmpty)
    • assert(a.isInstanceOf[String])
    • assert(a.length == 8)
    • assert(a.size == 8)
    • assert(a.exists(_ == 8))

    At this time, any other form of expression will get a TestFailedException with message saying the given expression was false. In the future, we will enhance this macro to give helpful error messages in more situations. In ScalaTest 2.0, however, this behavior was sufficient to allow the === that returns Boolean to be the default in tests. This makes === consistent between tests and production code.

    condition

    the boolean condition to assert

    Definition Classes
    Assertions
    Exceptions thrown

    TestFailedException if the condition is false.

  14. macro def assertCompiles(code: String)(implicit pos: Position): Assertion

    Asserts that a given string snippet of code passes both the Scala parser and type checker.

    Asserts that a given string snippet of code passes both the Scala parser and type checker.

    You can use this to make sure a snippet of code compiles:

    assertCompiles("val a: Int = 1")
    

    Although assertCompiles is implemented with a macro that determines at compile time whether the snippet of code represented by the passed string compiles, errors (i.e., snippets of code that do not compile) are reported as test failures at runtime.

    code

    the snippet of code that should compile

    Definition Classes
    Assertions
  15. macro def assertDoesNotCompile(code: String)(implicit pos: Position): Assertion

    Asserts that a given string snippet of code does not pass either the Scala parser or type checker.

    Asserts that a given string snippet of code does not pass either the Scala parser or type checker.

    Often when creating libraries you may wish to ensure that certain arrangements of code that represent potential “user errors” do not compile, so that your library is more error resistant. ScalaTest's Assertions trait includes the following syntax for that purpose:

    assertDoesNotCompile("val a: String = \"a string")
    

    Although assertDoesNotCompile is implemented with a macro that determines at compile time whether the snippet of code represented by the passed string doesn't compile, errors (i.e., snippets of code that do compile) are reported as test failures at runtime.

    Note that the difference between assertTypeError and assertDoesNotCompile is that assertDoesNotCompile will succeed if the given code does not compile for any reason, whereas assertTypeError will only succeed if the given code does not compile because of a type error. If the given code does not compile because of a syntax error, for example, assertDoesNotCompile will return normally but assertTypeError will throw a TestFailedException.

    code

    the snippet of code that should not type check

    Definition Classes
    Assertions
  16. def assertResult(expected: Any)(actual: Any)(implicit prettifier: Prettifier, pos: Position): Assertion

    Assert that the value passed as expected equals the value passed as actual.

    Assert that the value passed as expected equals the value passed as actual. If the actual value equals the expected value (as determined by ==), assertResult returns normally. Else, assertResult throws a TestFailedException whose detail message includes the expected and actual values.

    expected

    the expected value

    actual

    the actual value, which should equal the passed expected value

    Definition Classes
    Assertions
    Exceptions thrown

    TestFailedException if the passed actual value does not equal the passed expected value.

  17. def assertResult(expected: Any, clue: Any)(actual: Any)(implicit prettifier: Prettifier, pos: Position): Assertion

    Assert that the value passed as expected equals the value passed as actual.

    Assert that the value passed as expected equals the value passed as actual. If the actual equals the expected (as determined by ==), assertResult returns normally. Else, if actual is not equal to expected, assertResult throws a TestFailedException whose detail message includes the expected and actual values, as well as the String obtained by invoking toString on the passed clue.

    expected

    the expected value

    clue

    An object whose toString method returns a message to include in a failure report.

    actual

    the actual value, which should equal the passed expected value

    Definition Classes
    Assertions
    Exceptions thrown

    TestFailedException if the passed actual value does not equal the passed expected value.

  18. def assertThrows[T <: AnyRef](f: ⇒ Any)(implicit classTag: ClassTag[T], pos: Position): Assertion

    Ensure that an expected exception is thrown by the passed function value.

    Ensure that an expected exception is thrown by the passed function value. The thrown exception must be an instance of the type specified by the type parameter of this method. This method invokes the passed function. If the function throws an exception that's an instance of the specified type, this method returns Succeeded. Else, whether the passed function returns normally or completes abruptly with a different exception, this method throws TestFailedException.

    Note that the type specified as this method's type parameter may represent any subtype of AnyRef, not just Throwable or one of its subclasses. In Scala, exceptions can be caught based on traits they implement, so it may at times make sense to specify a trait that the intercepted exception's class must mix in. If a class instance is passed for a type that could not possibly be used to catch an exception (such as String, for example), this method will complete abruptly with a TestFailedException.

    Also note that the difference between this method and intercept is that this method does not return the expected exception, so it does not let you perform further assertions on that exception. Instead, this method returns Succeeded, which means it can serve as the last statement in an async- or safe-style suite. It also indicates to the reader of the code that nothing further is expected about the thrown exception other than its type. The recommended usage is to use assertThrows by default, intercept only when you need to inspect the caught exception further.

    f

    the function value that should throw the expected exception

    classTag

    an implicit ClassTag representing the type of the specified type parameter.

    returns

    the Succeeded singleton, if an exception of the expected type is thrown

    Definition Classes
    Assertions
    Exceptions thrown

    TestFailedException if the passed function does not complete abruptly with an exception that's an instance of the specified type.

  19. macro def assertTypeError(code: String)(implicit pos: Position): Assertion

    Asserts that a given string snippet of code does not pass the Scala type checker, failing if the given snippet does not pass the Scala parser.

    Asserts that a given string snippet of code does not pass the Scala type checker, failing if the given snippet does not pass the Scala parser.

    Often when creating libraries you may wish to ensure that certain arrangements of code that represent potential “user errors” do not compile, so that your library is more error resistant. ScalaTest's Assertions trait includes the following syntax for that purpose:

    assertTypeError("val a: String = 1")
    

    Although assertTypeError is implemented with a macro that determines at compile time whether the snippet of code represented by the passed string type checks, errors (i.e., snippets of code that do type check) are reported as test failures at runtime.

    Note that the difference between assertTypeError and assertDoesNotCompile is that assertDoesNotCompile will succeed if the given code does not compile for any reason, whereas assertTypeError will only succeed if the given code does not compile because of a type error. If the given code does not compile because of a syntax error, for example, assertDoesNotCompile will return normally but assertTypeError will throw a TestFailedException.

    code

    the snippet of code that should not type check

    Definition Classes
    Assertions
  20. val assertionsHelper: AssertionsHelper

    Helper instance used by code generated by macro assertion.

    Helper instance used by code generated by macro assertion.

    Definition Classes
    Assertions
  21. macro def assume(condition: Boolean, clue: Any)(implicit prettifier: Prettifier, pos: Position): Assertion

    Assume that a boolean condition, described in String message, is true.

    Assume that a boolean condition, described in String message, is true. If the condition is true, this method returns normally. Else, it throws TestCanceledException with a helpful error message appended with String obtained by invoking toString on the specified clue as the exception's detail message.

    This method is implemented in terms of a Scala macro that will generate a more helpful error message for expressions of this form:

    • assume(a == b, "a good clue")
    • assume(a != b, "a good clue")
    • assume(a === b, "a good clue")
    • assume(a !== b, "a good clue")
    • assume(a > b, "a good clue")
    • assume(a >= b, "a good clue")
    • assume(a < b, "a good clue")
    • assume(a <= b, "a good clue")
    • assume(a startsWith "prefix", "a good clue")
    • assume(a endsWith "postfix", "a good clue")
    • assume(a contains "something", "a good clue")
    • assume(a eq b, "a good clue")
    • assume(a ne b, "a good clue")
    • assume(a > 0 && b > 5, "a good clue")
    • assume(a > 0 || b > 5, "a good clue")
    • assume(a.isEmpty, "a good clue")
    • assume(!a.isEmpty, "a good clue")
    • assume(a.isInstanceOf[String], "a good clue")
    • assume(a.length == 8, "a good clue")
    • assume(a.size == 8, "a good clue")
    • assume(a.exists(_ == 8), "a good clue")

    At this time, any other form of expression will just get a TestCanceledException with message saying the given expression was false. In the future, we will enhance this macro to give helpful error messages in more situations. In ScalaTest 2.0, however, this behavior was sufficient to allow the === that returns Boolean to be the default in tests. This makes === consistent between tests and production code.

    condition

    the boolean condition to assume

    clue

    An objects whose toString method returns a message to include in a failure report.

    Definition Classes
    Assertions
    Exceptions thrown

    NullArgumentException if message is null.

    TestCanceledException if the condition is false.

  22. macro def assume(condition: Boolean)(implicit prettifier: Prettifier, pos: Position): Assertion

    Assume that a boolean condition is true.

    Assume that a boolean condition is true. If the condition is true, this method returns normally. Else, it throws TestCanceledException.

    This method is implemented in terms of a Scala macro that will generate a more helpful error message for expressions of this form:

    • assume(a == b)
    • assume(a != b)
    • assume(a === b)
    • assume(a !== b)
    • assume(a > b)
    • assume(a >= b)
    • assume(a < b)
    • assume(a <= b)
    • assume(a startsWith "prefix")
    • assume(a endsWith "postfix")
    • assume(a contains "something")
    • assume(a eq b)
    • assume(a ne b)
    • assume(a > 0 && b > 5)
    • assume(a > 0 || b > 5)
    • assume(a.isEmpty)
    • assume(!a.isEmpty)
    • assume(a.isInstanceOf[String])
    • assume(a.length == 8)
    • assume(a.size == 8)
    • assume(a.exists(_ == 8))

    At this time, any other form of expression will just get a TestCanceledException with message saying the given expression was false. In the future, we will enhance this macro to give helpful error messages in more situations. In ScalaTest 2.0, however, this behavior was sufficient to allow the === that returns Boolean to be the default in tests. This makes === consistent between tests and production code.

    condition

    the boolean condition to assume

    Definition Classes
    Assertions
    Exceptions thrown

    TestCanceledException if the condition is false.

  23. val behave: BehaveWord

    Supports shared test registration in FlatSpecs.

    Supports shared test registration in FlatSpecs.

    This field supports syntax such as the following:

    it should behave like nonFullStack(stackWithOneItem)
              ^
    

    For more information and examples of the use of behave, see the Shared tests section in the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  24. val behavior: BehaviorWord

    Supports the registration of a “subject” being specified and tested.

    Supports the registration of a “subject” being specified and tested.

    This field enables syntax such as the following subject registration:

    behavior of "A Stack"
    ^
    

    For more information and examples of the use of the behavior field, see the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  25. def cancel(cause: Throwable)(implicit pos: Position): Nothing

    Throws TestCanceledException, with the passed Throwable cause, to indicate a test failed.

    Throws TestCanceledException, with the passed Throwable cause, to indicate a test failed. The getMessage method of the thrown TestCanceledException will return cause.toString.

    cause

    a Throwable that indicates the cause of the cancellation.

    Definition Classes
    Assertions
    Exceptions thrown

    NullArgumentException if cause is null

  26. def cancel(message: String, cause: Throwable)(implicit pos: Position): Nothing

    Throws TestCanceledException, with the passed String message as the exception's detail message and Throwable cause, to indicate a test failed.

    Throws TestCanceledException, with the passed String message as the exception's detail message and Throwable cause, to indicate a test failed.

    message

    A message describing the failure.

    cause

    A Throwable that indicates the cause of the failure.

    Definition Classes
    Assertions
    Exceptions thrown

    NullArgumentException if message or cause is null

  27. def cancel(message: String)(implicit pos: Position): Nothing

    Throws TestCanceledException, with the passed String message as the exception's detail message, to indicate a test was canceled.

    Throws TestCanceledException, with the passed String message as the exception's detail message, to indicate a test was canceled.

    message

    A message describing the cancellation.

    Definition Classes
    Assertions
    Exceptions thrown

    NullArgumentException if message is null

  28. def cancel()(implicit pos: Position): Nothing

    Throws TestCanceledException to indicate a test was canceled.

    Throws TestCanceledException to indicate a test was canceled.

    Definition Classes
    Assertions
  29. def clone(): AnyRef
    Attributes
    protected[java.lang]
    Definition Classes
    AnyRef
    Annotations
    @native() @throws( ... )
  30. def complete[T](completeBlock: ⇒ T)(implicit futuristic: Futuristic[T]): ResultOfCompleteInvocation[T]

    Registers a block of code that produces any "futuristic" type (any type F for which an implicit Futuristic[F] instance is implicitly available), returning an object that offers a lastly method.

    Registers a block of code that produces any "futuristic" type (any type F for which an implicit Futuristic[F] instance is implicitly available), returning an object that offers a lastly method.

    See the main documentation for trait CompleteLastly for more detail.

    completeBlock

    cleanup code to execute whether the code passed to complete throws an exception or succesfully returns a futuristic value.

    Definition Classes
    CompleteLastly
  31. def conversionCheckedConstraint[A, B](implicit equivalenceOfA: Equivalence[A], cnv: (B) ⇒ A): CanEqual[A, B]
    Definition Classes
    TripleEquals → TripleEqualsSupport
  32. implicit def convertAssertionToFutureAssertion(assertion: compatible.Assertion): Future[compatible.Assertion]

    Implicitly converts an Assertion to a Future[Assertion].

    Implicitly converts an Assertion to a Future[Assertion].

    This implicit conversion is used to allow synchronous tests to be included along with asynchronous tests in an AsyncTestSuite. It will be

    assertion

    the Assertion to convert

    returns

    a Future[Assertion] that has already completed successfully (containing the Succeeded singleton).

    Definition Classes
    AsyncTestSuite
  33. def convertEquivalenceToAToBConstraint[A, B](equivalenceOfB: Equivalence[B])(implicit ev: <:<[A, B]): CanEqual[A, B]
    Definition Classes
    TripleEquals → TripleEqualsSupport
  34. def convertEquivalenceToAToBConversionConstraint[A, B](equivalenceOfB: Equivalence[B])(implicit ev: (A) ⇒ B): CanEqual[A, B]
    Definition Classes
    TripleEquals → TripleEqualsSupport
  35. def convertEquivalenceToBToAConstraint[A, B](equivalenceOfA: Equivalence[A])(implicit ev: <:<[B, A]): CanEqual[A, B]
    Definition Classes
    TripleEquals → TripleEqualsSupport
  36. def convertEquivalenceToBToAConversionConstraint[A, B](equivalenceOfA: Equivalence[A])(implicit ev: (B) ⇒ A): CanEqual[A, B]
    Definition Classes
    TripleEquals → TripleEqualsSupport
  37. def convertToCheckingEqualizer[T](left: T): CheckingEqualizer[T]
    Definition Classes
    TripleEquals → TripleEqualsSupport
  38. implicit def convertToEqualizer[T](left: T): Equalizer[T]
    Definition Classes
    TripleEquals → TripleEqualsSupport
  39. implicit def convertToInAndIgnoreMethods(resultOfStringPassedToVerb: ResultOfStringPassedToVerb): InAndIgnoreMethods

    Implicitly converts an object of type ResultOfStringPassedToVerb to an InAndIgnoreMethods, to enable in and ignore methods to be invokable on that object.

    Implicitly converts an object of type ResultOfStringPassedToVerb to an InAndIgnoreMethods, to enable in and ignore methods to be invokable on that object.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  40. implicit def convertToInAndIgnoreMethodsAfterTaggedAs(resultOfTaggedAsInvocation: ResultOfTaggedAsInvocation): InAndIgnoreMethodsAfterTaggedAs

    Implicitly converts an object of type ResultOfTaggedAsInvocation to an InAndIgnoreMethodsAfterTaggedAs, to enable in and ignore methods to be invokable on that object.

    Implicitly converts an object of type ResultOfTaggedAsInvocation to an InAndIgnoreMethodsAfterTaggedAs, to enable in and ignore methods to be invokable on that object.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  41. implicit def convertToStringCanWrapper(o: String)(implicit position: Position): StringCanWrapperForVerb

    Implicitly converts an object of type String to a StringCanWrapper, to enable can methods to be invokable on that object.

    Implicitly converts an object of type String to a StringCanWrapper, to enable can methods to be invokable on that object.

    Definition Classes
    CanVerb
  42. implicit def convertToStringMustWrapperForVerb(o: String)(implicit position: Position): StringMustWrapperForVerb

    Implicitly converts an object of type String to a StringMustWrapper, to enable must methods to be invokable on that object.

    Implicitly converts an object of type String to a StringMustWrapper, to enable must methods to be invokable on that object.

    Definition Classes
    MustVerb
  43. implicit def convertToStringShouldWrapperForVerb(o: String)(implicit position: Position): StringShouldWrapperForVerb

    Implicitly converts an object of type String to a StringShouldWrapperForVerb, to enable should methods to be invokable on that object.

    Implicitly converts an object of type String to a StringShouldWrapperForVerb, to enable should methods to be invokable on that object.

    Definition Classes
    ShouldVerb
  44. def defaultEquality[A]: Equality[A]
    Definition Classes
    TripleEqualsSupport
  45. final def eq(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  46. def equals(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  47. final def execute(testName: String = null, configMap: ConfigMap = ConfigMap.empty, color: Boolean = true, durations: Boolean = false, shortstacks: Boolean = false, fullstacks: Boolean = false, stats: Boolean = false): Unit

    Executes one or more tests in this Suite, printing results to the standard output.

    Executes one or more tests in this Suite, printing results to the standard output.

    This method invokes run on itself, passing in values that can be configured via the parameters to this method, all of which have default values. This behavior is convenient when working with ScalaTest in the Scala interpreter. Here's a summary of this method's parameters and how you can use them:

    The testName parameter

    If you leave testName at its default value (of null), this method will pass None to the testName parameter of run, and as a result all the tests in this suite will be executed. If you specify a testName, this method will pass Some(testName) to run, and only that test will be run. Thus to run all tests in a suite from the Scala interpreter, you can write:

    scala> (new ExampleSuite).execute()
    

    (The above syntax actually invokes the overloaded parameterless form of execute, which calls this form with its default parameter values.) To run just the test named "my favorite test" in a suite from the Scala interpreter, you would write:

    scala> (new ExampleSuite).execute("my favorite test")
    

    Or:

    scala> (new ExampleSuite).execute(testName = "my favorite test")
    

    The configMap parameter

    If you provide a value for the configMap parameter, this method will pass it to run. If not, the default value of an empty Map will be passed. For more information on how to use a config map to configure your test suites, see the config map section in the main documentation for this trait. Here's an example in which you configure a run with the name of an input file:

    scala> (new ExampleSuite).execute(configMap = Map("inputFileName" -> "in.txt")
    

    The color parameter

    If you leave the color parameter unspecified, this method will configure the reporter it passes to run to print to the standard output in color (via ansi escape characters). If you don't want color output, specify false for color, like this:

    scala> (new ExampleSuite).execute(color = false)
    

    The durations parameter

    If you leave the durations parameter unspecified, this method will configure the reporter it passes to run to not print durations for tests and suites to the standard output. If you want durations printed, specify true for durations, like this:

    scala> (new ExampleSuite).execute(durations = true)
    

    The shortstacks and fullstacks parameters

    If you leave both the shortstacks and fullstacks parameters unspecified, this method will configure the reporter it passes to run to not print stack traces for failed tests if it has a stack depth that identifies the offending line of test code. If you prefer a short stack trace (10 to 15 stack frames) to be printed with any test failure, specify true for shortstacks:

    scala> (new ExampleSuite).execute(shortstacks = true)
    

    For full stack traces, set fullstacks to true:

    scala> (new ExampleSuite).execute(fullstacks = true)
    

    If you specify true for both shortstacks and fullstacks, you'll get full stack traces.

    The stats parameter

    If you leave the stats parameter unspecified, this method will not fire RunStarting and either RunCompleted or RunAborted events to the reporter it passes to run. If you specify true for stats, this method will fire the run events to the reporter, and the reporter will print the expected test count before the run, and various statistics after, including the number of suites completed and number of tests that succeeded, failed, were ignored or marked pending. Here's how you get the stats:

    scala> (new ExampleSuite).execute(stats = true)
    

    To summarize, this method will pass to run:

    • testName - None if this method's testName parameter is left at its default value of null, else Some(testName).
    • reporter - a reporter that prints to the standard output
    • stopper - a Stopper whose apply method always returns false
    • filter - a Filter constructed with None for tagsToInclude and Set() for tagsToExclude
    • configMap - the configMap passed to this method
    • distributor - None
    • tracker - a new Tracker

    Note: In ScalaTest, the terms "execute" and "run" basically mean the same thing and can be used interchangably. The reason this method isn't named run is that it takes advantage of default arguments, and you can't mix overloaded methods and default arguments in Scala. (If named run, this method would have the same name but different arguments than the main run method that takes seven arguments. Thus it would overload and couldn't be used with default argument values.)

    Design note: This method has two "features" that may seem unidiomatic. First, the default value of testName is null. Normally in Scala the type of testName would be Option[String] and the default value would be None, as it is in this trait's run method. The null value is used here for two reasons. First, in ScalaTest 1.5, execute was changed from four overloaded methods to one method with default values, taking advantage of the default and named parameters feature introduced in Scala 2.8. To not break existing source code, testName needed to have type String, as it did in two of the overloaded execute methods prior to 1.5. The other reason is that execute has always been designed to be called primarily from an interpeter environment, such as the Scala REPL (Read-Evaluate-Print-Loop). In an interpreter environment, minimizing keystrokes is king. A String type with a null default value lets users type suite.execute("my test name") rather than suite.execute(Some("my test name")), saving several keystrokes.

    The second non-idiomatic feature is that shortstacks and fullstacks are all lower case rather than camel case. This is done to be consistent with the Shell, which also uses those forms. The reason lower case is used in the Shell is to save keystrokes in an interpreter environment. Most Unix commands, for example, are all lower case, making them easier and quicker to type. In the ScalaTest Shell, methods like shortstacks, fullstacks, and nostats, etc., are designed to be all lower case so they feel more like shell commands than methods.

    testName

    the name of one test to run.

    configMap

    a Map of key-value pairs that can be used by the executing Suite of tests.

    color

    a boolean that configures whether output is printed in color

    durations

    a boolean that configures whether test and suite durations are printed to the standard output

    shortstacks

    a boolean that configures whether short stack traces should be printed for test failures

    fullstacks

    a boolean that configures whether full stack traces should be printed for test failures

    stats

    a boolean that configures whether test and suite statistics are printed to the standard output

    Definition Classes
    Suite
    Exceptions thrown

    IllegalArgumentException if testName is defined, but no test with the specified test name exists in this Suite

    NullArgumentException if the passed configMap parameter is null.

  48. implicit def executionContext: ExecutionContext
    Definition Classes
    AsyncTestSuite
  49. def expectedTestCount(filter: Filter): Int

    The total number of tests that are expected to run when this Suite's run method is invoked.

    The total number of tests that are expected to run when this Suite's run method is invoked.

    This trait's implementation of this method returns the sum of:

    • the size of the testNames List, minus the number of tests marked as ignored and any tests that are exluded by the passed Filter
    • the sum of the values obtained by invoking expectedTestCount on every nested Suite contained in nestedSuites
    filter

    a Filter with which to filter tests to count based on their tags

    Definition Classes
    Suite
  50. def fail(cause: Throwable)(implicit pos: Position): Nothing

    Throws TestFailedException, with the passed Throwable cause, to indicate a test failed.

    Throws TestFailedException, with the passed Throwable cause, to indicate a test failed. The getMessage method of the thrown TestFailedException will return cause.toString.

    cause

    a Throwable that indicates the cause of the failure.

    Definition Classes
    Assertions
    Exceptions thrown

    NullArgumentException if cause is null

  51. def fail(message: String, cause: Throwable)(implicit pos: Position): Nothing

    Throws TestFailedException, with the passed String message as the exception's detail message and Throwable cause, to indicate a test failed.

    Throws TestFailedException, with the passed String message as the exception's detail message and Throwable cause, to indicate a test failed.

    message

    A message describing the failure.

    cause

    A Throwable that indicates the cause of the failure.

    Definition Classes
    Assertions
    Exceptions thrown

    NullArgumentException if message or cause is null

  52. def fail(message: String)(implicit pos: Position): Nothing

    Throws TestFailedException, with the passed String message as the exception's detail message, to indicate a test failed.

    Throws TestFailedException, with the passed String message as the exception's detail message, to indicate a test failed.

    message

    A message describing the failure.

    Definition Classes
    Assertions
    Exceptions thrown

    NullArgumentException if message is null

  53. def fail()(implicit pos: Position): Nothing

    Throws TestFailedException to indicate a test failed.

    Throws TestFailedException to indicate a test failed.

    Definition Classes
    Assertions
  54. def finalize(): Unit
    Attributes
    protected[java.lang]
    Definition Classes
    AnyRef
    Annotations
    @throws( classOf[java.lang.Throwable] )
  55. final def getClass(): Class[_]
    Definition Classes
    AnyRef → Any
    Annotations
    @native()
  56. def hashCode(): Int
    Definition Classes
    AnyRef → Any
    Annotations
    @native()
  57. val ignore: IgnoreWord

    Supports registration of ignored tests in FlatSpecs.

    Supports registration of ignored tests in FlatSpecs.

    This field enables syntax such as the following registration of an ignored test:

    ignore should "pop values in last-in-first-out order" in { ... }
    ^
    

    For more information and examples of the use of the ignore field, see the Ignored tests section in the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  58. def info: Informer

    Returns an Informer that during test execution will forward strings passed to its apply method to the current reporter.

    Returns an Informer that during test execution will forward strings passed to its apply method to the current reporter. If invoked in a constructor, it will register the passed string for forwarding later during test execution. If invoked from inside a scope, it will forward the information to the current reporter immediately. If invoked from inside a test function, it will record the information and forward it to the current reporter only after the test completed, as recordedEvents of the test completed event, such as TestSucceeded. If invoked at any other time, it will print to the standard output. This method can be called safely by any thread.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLikeInforming
  59. def intercept[T <: AnyRef](f: ⇒ Any)(implicit classTag: ClassTag[T], pos: Position): T

    Intercept and return an exception that's expected to be thrown by the passed function value.

    Intercept and return an exception that's expected to be thrown by the passed function value. The thrown exception must be an instance of the type specified by the type parameter of this method. This method invokes the passed function. If the function throws an exception that's an instance of the specified type, this method returns that exception. Else, whether the passed function returns normally or completes abruptly with a different exception, this method throws TestFailedException.

    Note that the type specified as this method's type parameter may represent any subtype of AnyRef, not just Throwable or one of its subclasses. In Scala, exceptions can be caught based on traits they implement, so it may at times make sense to specify a trait that the intercepted exception's class must mix in. If a class instance is passed for a type that could not possibly be used to catch an exception (such as String, for example), this method will complete abruptly with a TestFailedException.

    Also note that the difference between this method and assertThrows is that this method returns the expected exception, so it lets you perform further assertions on that exception. By contrast, the assertThrows method returns Succeeded, which means it can serve as the last statement in an async- or safe-style suite. assertThrows also indicates to the reader of the code that nothing further is expected about the thrown exception other than its type. The recommended usage is to use assertThrows by default, intercept only when you need to inspect the caught exception further.

    f

    the function value that should throw the expected exception

    classTag

    an implicit ClassTag representing the type of the specified type parameter.

    returns

    the intercepted exception, if it is of the expected type

    Definition Classes
    Assertions
    Exceptions thrown

    TestFailedException if the passed function does not complete abruptly with an exception that's an instance of the specified type.

  60. final def isInstanceOf[T0]: Boolean
    Definition Classes
    Any
  61. val it: ItWord

    Supports test (and shared test) registration in FlatSpecs.

    Supports test (and shared test) registration in FlatSpecs.

    This field enables syntax such as the following test registration:

    it should "pop values in last-in-first-out order" in { ... }
    ^
    

    It also enables syntax such as the following shared test registration:

    it should behave like nonEmptyStack(lastItemPushed)
    ^
    

    For more information and examples of the use of the it field, see the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  62. def lowPriorityConversionCheckedConstraint[A, B](implicit equivalenceOfB: Equivalence[B], cnv: (A) ⇒ B): CanEqual[A, B]
    Definition Classes
    TripleEquals → TripleEqualsSupport
  63. def lowPriorityTypeCheckedConstraint[A, B](implicit equivalenceOfB: Equivalence[B], ev: <:<[A, B]): CanEqual[A, B]
    Definition Classes
    TripleEquals → TripleEqualsSupport
  64. def markup: Documenter

    Returns a Documenter that during test execution will forward strings passed to its apply method to the current reporter.

    Returns a Documenter that during test execution will forward strings passed to its apply method to the current reporter. If invoked in a constructor, it will register the passed string for forwarding later during test execution. If invoked from inside a scope, it will forward the information to the current reporter immediately. If invoked from inside a test function, it will record the information and forward it to the current reporter only after the test completed, as recordedEvents of the test completed event, such as TestSucceeded. If invoked at any other time, it will print to the standard output. This method can be called safely by any thread.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLikeDocumenting
  65. final def ne(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  66. def nestedSuites: IndexedSeq[Suite]

    An immutable IndexedSeq of this Suite object's nested Suites.

    An immutable IndexedSeq of this Suite object's nested Suites. If this Suite contains no nested Suites, this method returns an empty IndexedSeq. This trait's implementation of this method returns an empty List.

    Definition Classes
    Suite
  67. def note: Notifier

    Returns a Notifier that during test execution will forward strings passed to its apply method to the current reporter.

    Returns a Notifier that during test execution will forward strings passed to its apply method to the current reporter. If invoked in a constructor, it will register the passed string for forwarding later during test execution. If invoked while this FlatSpec is being executed, such as from inside a test function, it will forward the information to the current reporter immediately. If invoked at any other time, it will print to the standard output. This method can be called safely by any thread.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLikeNotifying
  68. final def notify(): Unit
    Definition Classes
    AnyRef
    Annotations
    @native()
  69. final def notifyAll(): Unit
    Definition Classes
    AnyRef
    Annotations
    @native()
  70. def parallelAsyncTestExecution: Boolean
    Attributes
    protected[org.scalatest]
    Definition Classes
    AsyncTestSuite
  71. def pending: Assertion with PendingStatement

    Throws TestPendingException to indicate a test is pending.

    Throws TestPendingException to indicate a test is pending.

    A pending test is one that has been given a name but is not yet implemented. The purpose of pending tests is to facilitate a style of testing in which documentation of behavior is sketched out before tests are written to verify that behavior (and often, the before the behavior of the system being tested is itself implemented). Such sketches form a kind of specification of what tests and functionality to implement later.

    To support this style of testing, a test can be given a name that specifies one bit of behavior required by the system being tested. The test can also include some code that sends more information about the behavior to the reporter when the tests run. At the end of the test, it can call method pending, which will cause it to complete abruptly with TestPendingException. Because tests in ScalaTest can be designated as pending with TestPendingException, both the test name and any information sent to the reporter when running the test can appear in the report of a test run. (In other words, the code of a pending test is executed just like any other test.) However, because the test completes abruptly with TestPendingException, the test will be reported as pending, to indicate the actual test, and possibly the functionality it is intended to test, has not yet been implemented.

    Note: This method always completes abruptly with a TestPendingException. Thus it always has a side effect. Methods with side effects are usually invoked with parentheses, as in pending(). This method is defined as a parameterless method, in flagrant contradiction to recommended Scala style, because it forms a kind of DSL for pending tests. It enables tests in suites such as FunSuite or FunSpec to be denoted by placing "(pending)" after the test name, as in:

    test("that style rules are not laws") (pending)
    

    Readers of the code see "pending" in parentheses, which looks like a little note attached to the test name to indicate it is pending. Whereas "(pending()) looks more like a method call, "(pending)" lets readers stay at a higher level, forgetting how it is implemented and just focusing on the intent of the programmer who wrote the code.

    Definition Classes
    Assertions
  72. def pendingUntilFixed(f: ⇒ Unit)(implicit pos: Position): Assertion with PendingStatement

    Execute the passed block of code, and if it completes abruptly, throw TestPendingException, else throw TestFailedException.

    Execute the passed block of code, and if it completes abruptly, throw TestPendingException, else throw TestFailedException.

    This method can be used to temporarily change a failing test into a pending test in such a way that it will automatically turn back into a failing test once the problem originally causing the test to fail has been fixed. At that point, you need only remove the pendingUntilFixed call. In other words, a pendingUntilFixed surrounding a block of code that isn't broken is treated as a test failure. The motivation for this behavior is to encourage people to remove pendingUntilFixed calls when there are no longer needed.

    This method facilitates a style of testing in which tests are written before the code they test. Sometimes you may encounter a test failure that requires more functionality than you want to tackle without writing more tests. In this case you can mark the bit of test code causing the failure with pendingUntilFixed. You can then write more tests and functionality that eventually will get your production code to a point where the original test won't fail anymore. At this point the code block marked with pendingUntilFixed will no longer throw an exception (because the problem has been fixed). This will in turn cause pendingUntilFixed to throw TestFailedException with a detail message explaining you need to go back and remove the pendingUntilFixed call as the problem orginally causing your test code to fail has been fixed.

    f

    a block of code, which if it completes abruptly, should trigger a TestPendingException

    Definition Classes
    Assertions
    Exceptions thrown

    TestPendingException if the passed block of code completes abruptly with an Exception or AssertionError

  73. def recoverToExceptionIf[T <: AnyRef](future: Future[Any])(implicit classTag: ClassTag[T], exCtx: ExecutionContext, pos: Position): Future[T]

    Transforms a future of any type into a Future[T], where T is a given expected exception type, which succeeds if the given future completes with a Failure containing the specified exception type.

    Transforms a future of any type into a Future[T], where T is a given expected exception type, which succeeds if the given future completes with a Failure containing the specified exception type.

    See the main documentation for this trait for more detail and examples.

    future

    A future of any type, which you expect to fail with an exception of the specified type T

    returns

    a Future[T] containing on success the expected exception, or containing on failure a TestFailedException

    Definition Classes
    RecoverMethods
  74. def recoverToSucceededIf[T <: AnyRef](future: Future[Any])(implicit classTag: ClassTag[T], exCtx: ExecutionContext, pos: Position): Future[Assertion]

    Transforms a future of any type into a Future[Assertion] that succeeds if the future completes with a Failure containing the specified exception type.

    Transforms a future of any type into a Future[Assertion] that succeeds if the future completes with a Failure containing the specified exception type.

    See the main documentation for this trait for more detail and examples.

    future

    A future of any type, which you expect to fail with an exception of the specified type T

    returns

    a Future[Assertion] containing on success the Succeeded singleton, or containing on failure a TestFailedException

    Definition Classes
    RecoverMethods
  75. final def registerAsyncTest(testText: String, testTags: Tag*)(testFun: ⇒ Future[compatible.Assertion])(implicit pos: Position): Unit

    Registers a test.

    Registers a test.

    testText

    the test text

    testTags

    the test tags

    testFun

    the test function

    Definition Classes
    AsyncFlatSpecLikeAsyncTestRegistration
  76. final def registerIgnoredAsyncTest(testText: String, testTags: Tag*)(testFun: ⇒ Future[compatible.Assertion])(implicit pos: Position): Unit

    Registers an ignored test.

    Registers an ignored test.

    testText

    the test text

    testTags

    the test tags

    testFun

    the test function

    Definition Classes
    AsyncFlatSpecLikeAsyncTestRegistration
  77. def rerunner: Option[String]

    The fully qualified class name of the rerunner to rerun this suite.

    The fully qualified class name of the rerunner to rerun this suite. This implementation will look at this.getClass and see if it is either an accessible Suite, or it has a WrapWith annotation. If so, it returns the fully qualified class name wrapped in a Some, or else it returns None.

    Definition Classes
    Suite
  78. def run(testName: Option[String], args: Args): Status

    Runs this suite of tests.

    Runs this suite of tests.

    If testName is None, this trait's implementation of this method calls these two methods on this object in this order:

    • runNestedSuites
    • runTests

    If testName is defined, then this trait's implementation of this method calls runTests, but does not call runNestedSuites. This behavior is part of the contract of this method. Subclasses that override run must take care not to call runNestedSuites if testName is defined. (The OneInstancePerTest trait depends on this behavior, for example.)

    Subclasses and subtraits that override this run method can implement them without invoking either the runTests or runNestedSuites methods, which are invoked by this trait's implementation of this method. It is recommended, but not required, that subclasses and subtraits that override run in a way that does not invoke runNestedSuites also override runNestedSuites and make it final. Similarly it is recommended, but not required, that subclasses and subtraits that override run in a way that does not invoke runTests also override runTests (and runTest, which this trait's implementation of runTests calls) and make it final. The implementation of these final methods can either invoke the superclass implementation of the method, or throw an UnsupportedOperationException if appropriate. The reason for this recommendation is that ScalaTest includes several traits that override these methods to allow behavior to be mixed into a Suite. For example, trait BeforeAndAfterEach overrides runTestss. In a Suite subclass that no longer invokes runTests from run, the BeforeAndAfterEach trait is not applicable. Mixing it in would have no effect. By making runTests final in such a Suite subtrait, you make the attempt to mix BeforeAndAfterEach into a subclass of your subtrait a compiler error. (It would fail to compile with a complaint that BeforeAndAfterEach is trying to override runTests, which is a final method in your trait.)

    testName

    an optional name of one test to run. If None, all relevant tests should be run. I.e., None acts like a wildcard that means run all relevant tests in this Suite.

    args

    the Args for this run

    returns

    a Status object that indicates when all tests and nested suites started by this method have completed, and whether or not a failure occurred.

    Definition Classes
    AsyncFlatSpecLikeSuite
    Exceptions thrown

    IllegalArgumentException if testName is defined, but no test with the specified test name exists in this Suite

    NullArgumentException if any passed parameter is null.

  79. def runNestedSuites(args: Args): Status

    Run zero to many of this Suite's nested Suites.

    Run zero to many of this Suite's nested Suites.

    If the passed distributor is None, this trait's implementation of this method invokes run on each nested Suite in the List obtained by invoking nestedSuites. If a nested Suite's run method completes abruptly with an exception, this trait's implementation of this method reports that the Suite aborted and attempts to run the next nested Suite. If the passed distributor is defined, this trait's implementation puts each nested Suite into the Distributor contained in the Some, in the order in which the Suites appear in the List returned by nestedSuites, passing in a new Tracker obtained by invoking nextTracker on the Tracker passed to this method.

    Implementations of this method are responsible for ensuring SuiteStarting events are fired to the Reporter before executing any nested Suite, and either SuiteCompleted or SuiteAborted after executing any nested Suite.

    args

    the Args for this run

    returns

    a Status object that indicates when all nested suites started by this method have completed, and whether or not a failure occurred.

    Attributes
    protected
    Definition Classes
    Suite
    Exceptions thrown

    NullArgumentException if any passed parameter is null.

  80. def runTest(testName: String, args: Args): Status

    Run a test.

    Run a test. This trait's implementation runs the test registered with the name specified by testName. Each test's name is a concatenation of the text of all describers surrounding a test, from outside in, and the test's spec text, with one space placed between each item. (See the documenation for testNames for an example.)

    testName

    the name of one test to execute.

    args

    the Args for this run

    returns

    a Status object that indicates when the test started by this method has completed, and whether or not it failed .

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLikeAsyncTestSuiteSuite
    Exceptions thrown

    NullArgumentException if any of testName, reporter, stopper, or configMap is null.

  81. def runTests(testName: Option[String], args: Args): Status

    Run zero to many of this FlatSpec's tests.

    Run zero to many of this FlatSpec's tests.

    This method takes a testName parameter that optionally specifies a test to invoke. If testName is Some, this trait's implementation of this method invokes runTest on this object, passing in:

    • testName - the String value of the testName Option passed to this method
    • reporter - the Reporter passed to this method, or one that wraps and delegates to it
    • stopper - the Stopper passed to this method, or one that wraps and delegates to it
    • configMap - the configMap passed to this method, or one that wraps and delegates to it

    This method takes a Set of tag names that should be included (tagsToInclude), and a Set that should be excluded (tagsToExclude), when deciding which of this Suite's tests to execute. If tagsToInclude is empty, all tests will be executed except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is non-empty, only tests belonging to tags mentioned in tagsToInclude, and not mentioned in tagsToExclude will be executed. However, if testName is Some, tagsToInclude and tagsToExclude are essentially ignored. Only if testName is None will tagsToInclude and tagsToExclude be consulted to determine which of the tests named in the testNames Set should be run. For more information on trait tags, see the main documentation for this trait.

    If testName is None, this trait's implementation of this method invokes testNames on this Suite to get a Set of names of tests to potentially execute. (A testNames value of None essentially acts as a wildcard that means all tests in this Suite that are selected by tagsToInclude and tagsToExclude should be executed.) For each test in the testName Set, in the order they appear in the iterator obtained by invoking the elements method on the Set, this trait's implementation of this method checks whether the test should be run based on the tagsToInclude and tagsToExclude Sets. If so, this implementation invokes runTest, passing in:

    • testName - the String name of the test to run (which will be one of the names in the testNames Set)
    • reporter - the Reporter passed to this method, or one that wraps and delegates to it
    • stopper - the Stopper passed to this method, or one that wraps and delegates to it
    • configMap - the configMap passed to this method, or one that wraps and delegates to it
    testName

    an optional name of one test to execute. If None, all relevant tests should be executed. I.e., None acts like a wildcard that means execute all relevant tests in this FlatSpec.

    args

    the Args for this run

    returns

    a Status object that indicates when all tests started by this method have completed, and whether or not a failure occurred.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLikeSuite
    Exceptions thrown

    NullArgumentException if any of testName, reporter, stopper, tagsToInclude, tagsToExclude, or configMap is null.

  82. implicit val shorthandSharedTestRegistrationFunction: StringVerbBehaveLikeInvocation

    Supports the shorthand form of shared test registration.

    Supports the shorthand form of shared test registration.

    For example, this method enables syntax such as the following in:

    "A Stack (with one item)" should behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
                              ^
    

    This function is passed as an implicit parameter to a should method provided in ShouldVerb, a must method provided in MustVerb, and a can method provided in CanVerb. When invoked, this function registers the subject description (the parameter to the function) and returns a BehaveWord.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  83. implicit val shorthandTestRegistrationFunction: StringVerbStringInvocation

    Supports the shorthand form of test registration.

    Supports the shorthand form of test registration.

    For example, this method enables syntax such as the following:

    "A Stack (when empty)" should "be empty" in { ... }
                           ^
    

    This function is passed as an implicit parameter to a should method provided in ShouldVerb, a must method provided in MustVerb, and a can method provided in CanVerb. When invoked, this function registers the subject description (the first parameter to the function) and returns a ResultOfStringPassedToVerb initialized with the verb and rest parameters (the second and third parameters to the function, respectively).

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  84. final val styleName: String

    Suite style name.

    Suite style name.

    Definition Classes
    AsyncFlatSpecLikeSuite
  85. final val succeed: Assertion

    The Succeeded singleton.

    The Succeeded singleton.

    You can use succeed to solve a type error when an async test does not end in either Future[Assertion] or Assertion. Because Assertion is a type alias for Succeeded.type, putting succeed at the end of a test body (or at the end of a function being used to map the final future of a test body) will solve the type error.

    Definition Classes
    Assertions
  86. def suiteId: String

    A string ID for this Suite that is intended to be unique among all suites reported during a run.

    A string ID for this Suite that is intended to be unique among all suites reported during a run.

    This trait's implementation of this method returns the fully qualified name of this object's class. Each suite reported during a run will commonly be an instance of a different Suite class, and in such cases, this default implementation of this method will suffice. However, in special cases you may need to override this method to ensure it is unique for each reported suite. For example, if you write a Suite subclass that reads in a file whose name is passed to its constructor and dynamically creates a suite of tests based on the information in that file, you will likely need to override this method in your Suite subclass, perhaps by appending the pathname of the file to the fully qualified class name. That way if you run a suite of tests based on a directory full of these files, you'll have unique suite IDs for each reported suite.

    The suite ID is intended to be unique, because ScalaTest does not enforce that it is unique. If it is not unique, then you may not be able to uniquely identify a particular test of a particular suite. This ability is used, for example, to dynamically tag tests as having failed in the previous run when rerunning only failed tests.

    returns

    this Suite object's ID.

    Definition Classes
    Suite
  87. def suiteName: String

    A user-friendly suite name for this Suite.

    A user-friendly suite name for this Suite.

    This trait's implementation of this method returns the simple name of this object's class. This trait's implementation of runNestedSuites calls this method to obtain a name for Reports to pass to the suiteStarting, suiteCompleted, and suiteAborted methods of the Reporter.

    returns

    this Suite object's suite name.

    Definition Classes
    Suite
  88. final def synchronized[T0](arg0: ⇒ T0): T0
    Definition Classes
    AnyRef
  89. def tags: Map[String, Set[String]]

    A Map whose keys are String names of tagged tests and whose associated values are the Set of tags for the test.

    A Map whose keys are String names of tagged tests and whose associated values are the Set of tags for the test. If this FlatSpec contains no tags, this method returns an empty Map.

    This trait's implementation returns tags that were passed as strings contained in Tag objects passed to taggedAs.

    In addition, this trait's implementation will also auto-tag tests with class level annotations. For example, if you annotate @Ignore at the class level, all test methods in the class will be auto-annotated with org.scalatest.Ignore.

    Definition Classes
    AsyncFlatSpecLikeSuite
  90. def testDataFor(testName: String, theConfigMap: ConfigMap = ConfigMap.empty): TestData

    Provides a TestData instance for the passed test name, given the passed config map.

    Provides a TestData instance for the passed test name, given the passed config map.

    This method is used to obtain a TestData instance to pass to withFixture(NoArgTest) and withFixture(OneArgTest) and the beforeEach and afterEach methods of trait BeforeAndAfterEach.

    testName

    the name of the test for which to return a TestData instance

    theConfigMap

    the config map to include in the returned TestData

    returns

    a TestData instance for the specified test, which includes the specified config map

    Definition Classes
    AsyncFlatSpecLikeSuite
  91. def testNames: Set[String]

    An immutable Set of test names.

    An immutable Set of test names. If this FlatSpec contains no tests, this method returns an empty Set.

    This trait's implementation of this method will return a set that contains the names of all registered tests. The set's iterator will return those names in the order in which the tests were registered. Each test's name is composed of the concatenation of the text of each surrounding describer, in order from outside in, and the text of the example itself, with all components separated by a space. For example, consider this FlatSpec:

    import org.scalatest.FlatSpec
    
    class StackSpec extends FlatSpec {
    "A Stack (when not empty)" must "allow me to pop" in {} it must "not be empty" in {}
    "A Stack (when not full)" must "allow me to push" in {} it must "not be full" in {} }

    Invoking testNames on this FlatSpec will yield a set that contains the following two test name strings:

    "A Stack (when not empty) must allow me to pop"
    "A Stack (when not empty) must not be empty"
    "A Stack (when not full) must allow me to push"
    "A Stack (when not full) must not be full"
    

    Definition Classes
    AsyncFlatSpecLikeSuite
  92. val they: TheyWord

    Supports test (and shared test) registration in FlatSpecs.

    Supports test (and shared test) registration in FlatSpecs.

    This field enables syntax such as the following test registration:

    they should "pop values in last-in-first-out order" in { ... }
    ^
    

    It also enables syntax such as the following shared test registration:

    they should behave like nonEmptyStack(lastItemPushed)
    ^
    

    For more information and examples of the use of the it field, see the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    AsyncFlatSpecLike
  93. def toString(): String

    Returns a user friendly string for this suite, composed of the simple name of the class (possibly simplified further by removing dollar signs if added by the Scala interpeter) and, if this suite contains nested suites, the result of invoking toString on each of the nested suites, separated by commas and surrounded by parentheses.

    Returns a user friendly string for this suite, composed of the simple name of the class (possibly simplified further by removing dollar signs if added by the Scala interpeter) and, if this suite contains nested suites, the result of invoking toString on each of the nested suites, separated by commas and surrounded by parentheses.

    returns

    a user-friendly string for this suite

    Definition Classes
    AsyncFlatSpec → AnyRef → Any
  94. def typeCheckedConstraint[A, B](implicit equivalenceOfA: Equivalence[A], ev: <:<[B, A]): CanEqual[A, B]
    Definition Classes
    TripleEquals → TripleEqualsSupport
  95. implicit def unconstrainedEquality[A, B](implicit equalityOfA: Equality[A]): CanEqual[A, B]
    Definition Classes
    TripleEquals → TripleEqualsSupport
  96. final def wait(): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  97. final def wait(arg0: Long, arg1: Int): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  98. final def wait(arg0: Long): Unit
    Definition Classes
    AnyRef
    Annotations
    @native() @throws( ... )
  99. def withClue[T](clue: Any)(fun: ⇒ T): T

    Executes the block of code passed as the second parameter, and, if it completes abruptly with a ModifiableMessage exception, prepends the "clue" string passed as the first parameter to the beginning of the detail message of that thrown exception, then rethrows it.

    Executes the block of code passed as the second parameter, and, if it completes abruptly with a ModifiableMessage exception, prepends the "clue" string passed as the first parameter to the beginning of the detail message of that thrown exception, then rethrows it. If clue does not end in a white space character, one space will be added between it and the existing detail message (unless the detail message is not defined).

    This method allows you to add more information about what went wrong that will be reported when a test fails. Here's an example:

    withClue("(Employee's name was: " + employee.name + ")") {
      intercept[IllegalArgumentException] {
        employee.getTask(-1)
      }
    }
    

    If an invocation of intercept completed abruptly with an exception, the resulting message would be something like:

    (Employee's name was Bob Jones) Expected IllegalArgumentException to be thrown, but no exception was thrown
    

    Definition Classes
    Assertions
    Exceptions thrown

    NullArgumentException if the passed clue is null

  100. def withFixture(test: NoArgAsyncTest): FutureOutcome

    Run the passed test function in the context of a fixture established by this method.

    Run the passed test function in the context of a fixture established by this method.

    This method should set up the fixture needed by the tests of the current suite, invoke the test function, and if needed, register a callback on the resulting FutureOutcome to perform any clean up needed after the test completes. Because the NoArgAsyncTest function passed to this method takes no parameters, preparing the fixture will require side effects, such as reassigning instance vars in this Suite or initializing a globally accessible external database. If you want to avoid reassigning instance vars you can use fixture.AsyncTestSuite.

    This trait's implementation of runTest invokes this method for each test, passing in a NoArgAsyncTest whose apply method will execute the code of the test and returns its result.

    This trait's implementation of this method simply invokes the passed NoArgAsyncTest function.

    test

    the no-arg async test function to run with a fixture

    Definition Classes
    AsyncTestSuite

Deprecated Value Members

  1. final def execute: Unit

    The parameterless execute method has been deprecated and will be removed in a future version of ScalaTest. Please invoke execute with empty parens instead: execute().

    The parameterless execute method has been deprecated and will be removed in a future version of ScalaTest. Please invoke execute with empty parens instead: execute().

    The original purpose of this method, which simply invokes the other overloaded form of execute with default parameter values, was to serve as a mini-DSL for the Scala interpreter. It allowed you to execute a Suite in the interpreter with a minimum of finger typing:

    scala> org.scalatest.run(new SetSpec)
    An empty Set
    - should have size 0
    - should produce NoSuchElementException when head is invoked !!! IGNORED !!!
    

    However it uses postfix notation, which is now behind a language feature import. Thus better to use the other execute method or org.scalatest.run:

    (new ExampleSuite).execute()
    // or
    org.scalatest.run(new ExampleSuite)
    

    Definition Classes
    Suite
    Annotations
    @deprecated
    Deprecated

    The parameterless execute method has been deprecated and will be removed in a future version of ScalaTest. Please invoke execute with empty parens instead: execute().

  2. def trap[T](f: ⇒ T): Throwable

    Trap and return any thrown exception that would normally cause a ScalaTest test to fail, or create and return a new RuntimeException indicating no exception is thrown.

    Trap and return any thrown exception that would normally cause a ScalaTest test to fail, or create and return a new RuntimeException indicating no exception is thrown.

    This method is intended to be used in the Scala interpreter to eliminate large stack traces when trying out ScalaTest assertions and matcher expressions. It is not intended to be used in regular test code. If you want to ensure that a bit of code throws an expected exception, use intercept, not trap. Here's an example interpreter session without trap:

    scala> import org.scalatest._
    import org.scalatest._
    
    scala> import Matchers._
    import Matchers._
    
    scala> val x = 12
    a: Int = 12
    
    scala> x shouldEqual 13
    org.scalatest.exceptions.TestFailedException: 12 did not equal 13
       at org.scalatest.Assertions$class.newAssertionFailedException(Assertions.scala:449)
       at org.scalatest.Assertions$.newAssertionFailedException(Assertions.scala:1203)
       at org.scalatest.Assertions$AssertionsHelper.macroAssertTrue(Assertions.scala:417)
       at .<init>(<console>:15)
       at .<clinit>(<console>)
       at .<init>(<console>:7)
       at .<clinit>(<console>)
       at $print(<console>)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
       at java.lang.reflect.Method.invoke(Method.java:597)
       at scala.tools.nsc.interpreter.IMain$ReadEvalPrint.call(IMain.scala:731)
       at scala.tools.nsc.interpreter.IMain$Request.loadAndRun(IMain.scala:980)
       at scala.tools.nsc.interpreter.IMain.loadAndRunReq$1(IMain.scala:570)
       at scala.tools.nsc.interpreter.IMain.interpret(IMain.scala:601)
       at scala.tools.nsc.interpreter.IMain.interpret(IMain.scala:565)
       at scala.tools.nsc.interpreter.ILoop.reallyInterpret$1(ILoop.scala:745)
       at scala.tools.nsc.interpreter.ILoop.interpretStartingWith(ILoop.scala:790)
       at scala.tools.nsc.interpreter.ILoop.command(ILoop.scala:702)
       at scala.tools.nsc.interpreter.ILoop.processLine$1(ILoop.scala:566)
       at scala.tools.nsc.interpreter.ILoop.innerLoop$1(ILoop.scala:573)
       at scala.tools.nsc.interpreter.ILoop.loop(ILoop.scala:576)
       at scala.tools.nsc.interpreter.ILoop$$anonfun$process$1.apply$mcZ$sp(ILoop.scala:867)
       at scala.tools.nsc.interpreter.ILoop$$anonfun$process$1.apply(ILoop.scala:822)
       at scala.tools.nsc.interpreter.ILoop$$anonfun$process$1.apply(ILoop.scala:822)
       at scala.tools.nsc.util.ScalaClassLoader$.savingContextLoader(ScalaClassLoader.scala:135)
       at scala.tools.nsc.interpreter.ILoop.process(ILoop.scala:822)
       at scala.tools.nsc.MainGenericRunner.runTarget$1(MainGenericRunner.scala:83)
       at scala.tools.nsc.MainGenericRunner.process(MainGenericRunner.scala:96)
       at scala.tools.nsc.MainGenericRunner$.main(MainGenericRunner.scala:105)
       at scala.tools.nsc.MainGenericRunner.main(MainGenericRunner.scala)
    

    That's a pretty tall stack trace. Here's what it looks like when you use trap:

    scala> trap { x shouldEqual 13 }
    res1: Throwable = org.scalatest.exceptions.TestFailedException: 12 did not equal 13
    

    Much less clutter. Bear in mind, however, that if no exception is thrown by the passed block of code, the trap method will create a new NormalResult (a subclass of Throwable made for this purpose only) and return that. If the result was the Unit value, it will simply say that no exception was thrown:

    scala> trap { x shouldEqual 12 }
    res2: Throwable = No exception was thrown.
    

    If the passed block of code results in a value other than Unit, the NormalResult's toString will print the value:

    scala> trap { "Dude!" }
    res3: Throwable = No exception was thrown. Instead, result was: "Dude!"
    

    Although you can access the result value from the NormalResult, its type is Any and therefore not very convenient to use. It is not intended that trap be used in test code. The sole intended use case for trap is decluttering Scala interpreter sessions by eliminating stack traces when executing assertion and matcher expressions.

    Definition Classes
    Assertions
    Annotations
    @deprecated
    Deprecated

    The trap method is no longer needed for demos in the REPL, which now abreviates stack traces, and will be removed in a future version of ScalaTest

Inherited from AsyncFlatSpecLike

Inherited from Documenting

Inherited from Alerting

Inherited from Notifying

Inherited from Informing

Inherited from CanVerb

Inherited from MustVerb

Inherited from ShouldVerb

Inherited from AsyncTestRegistration

Inherited from AsyncTestSuite

Inherited from CompleteLastly

Inherited from RecoverMethods

Inherited from Suite

Inherited from Serializable

Inherited from Serializable

Inherited from Assertions

Inherited from TripleEquals

Inherited from TripleEqualsSupport

Inherited from AnyRef

Inherited from Any

Ungrouped