Retries

Companion object Retries

trait Retries extends AnyRef

Provides methods that can be used in withFixture implementations to retry tests in various scenarios.

Trait Retries is intended to help you deal with “flickers”—tests that usually pass, but occasionally fail. The best way to deal with such tests is to fix them so they always pass. Sometimes, however, this is not practical. In such cases, flickers can waste your time by forcing you to investigate test failures that turn out to be flickers. Or worse, like the boy who cried wolf, the flickers may train you an your colleagues to not pay attention to failures such that you don't notice real problems, at least not in a timely manner.

Trait Retries offers methods that will retry a failed and/or canceled test once, on the same thread, with or without a delay. These methods take a block that results in Outcome, and are intended to be used in withFixture methods. You should be very selective about which tests you retry, retrying those for which you have good evidence to conclude they are flickers. Thus it is recommended you only retry tests that are tagged with Retryable, and only tag tests as such once they have flickered consistently for a while, and only after you invested a reasonable effort into fixing them properly.

Here's an example showing how you might use Retries:

package org.scalatest.examples.tagobjects.retryable

import org.scalatest._
import tagobjects.Retryable

class SetSpec extends FlatSpec with Retries {

  override def withFixture(test: NoArgTest) = {
    if (isRetryable(test))
      withRetry { super.withFixture(test) }
    else
      super.withFixture(test)
  }

  "An empty Set" should "have size 0" taggedAs(Retryable) in {
    assert(Set.empty.size === 0)
  }
}

Source: Retries.scala

Linear Supertypes

AnyRef, Any

Known Subclasses

Retries

Ordering

Alphabetic
By Inheritance

Inherited

Retries
AnyRef
Any

Hide All
Show All

Visibility

Public
All

Value Members

final def !=(arg0: Any): Boolean
Definition Classes
AnyRef → Any
final def ##(): Int
Definition Classes
AnyRef → Any
final def ==(arg0: Any): Boolean
Definition Classes
AnyRef → Any
final def asInstanceOf[T0]: T0
Definition Classes
Any
def clone(): AnyRef
Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.CloneNotSupportedException]) @native()
final def eq(arg0: AnyRef): Boolean
Definition Classes
AnyRef
def equals(arg0: AnyRef): Boolean
Definition Classes
AnyRef → Any
def finalize(): Unit
Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.Throwable])
final def getClass(): Class[_ <: AnyRef]
Definition Classes
AnyRef → Any
Annotations
@native()
def hashCode(): Int
Definition Classes
AnyRef → Any
Annotations
@native()
final def isInstanceOf[T0]: Boolean
Definition Classes
Any
def isRetryable(testData: TestData): Boolean
Indicates whether the test described by the given TestData includes the tag org.scalatest.tags.Retryable.
Indicates whether the test described by the given TestData includes the tag org.scalatest.tags.Retryable.
This method provides an easy way to selectively retry just tests that are flickering. You can annotated such problematic tests with Retryable, and just retry those. Here's what it might look like:
```
override def withFixture(test: NoArgTest) = {
  if (isRetryable(test))
    withRetry { super.withFixture(test) }
  else
    super.withFixture(test)
}
```
final def ne(arg0: AnyRef): Boolean
Definition Classes
AnyRef
final def notify(): Unit
Definition Classes
AnyRef
Annotations
@native()
final def notifyAll(): Unit
Definition Classes
AnyRef
Annotations
@native()
final def synchronized[T0](arg0: => T0): T0
Definition Classes
AnyRef
def toString(): String
Definition Classes
AnyRef → Any
final def wait(): Unit
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.InterruptedException])
final def wait(arg0: Long, arg1: Int): Unit
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.InterruptedException])
final def wait(arg0: Long): Unit
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.InterruptedException]) @native()

def withRetry(delay: Span)(blk: => Outcome): Outcome

Retries the given block with a given delay if the Outcome of executing the block is either Failed or Canceled.

The behavior of this method is defined in the table below. The first two rows show the main "retry" behavior: if executing the block initially fails, and on retry it succeeds, the result is Canceled. The purpose of this is to deal with "flickering" tests by downgrading a failure that succeeds on retry to a cancelation. Or, if executing the block initially results in Canceled, and on retry it succeeds, the result is Succeeded. The purpose of this is to deal with tests that intermittently cancel by ignoring a cancelation that succeeds on retry.

In the table below, if the “Retry Outcome” has just a dash, the block is not retried. Otherwise, the block is retried on the same thread, after sleeping the given delay.

First `Outcome`	Retry `Outcome`	Result
`Failed`	`Succeeded`	`Canceled` (the `Succeeded` and `Failed` are discarded; the exception from the `Failed` is the cause of the exception in the `Canceled`)
`Canceled`	`Succeeded`	`Succeeded` (the `Canceled` is discarded)
`Succeeded`	—	`Succeeded` (no retry)
`Pending`	—	`Pending` (no retry)
`Failed`	`Failed`	the first `Failed` (the second `Failed` is discarded)
`Failed`	`Pending`	the `Failed` (the `Pending` is discarded)
`Failed`	`Canceled`	the `Failed` (the `Canceled` is discarded)
`Canceled`	`Canceled`	the first `Canceled` (the second `Canceled` is discarded)
`Canceled`	`Pending`	the `Canceled` (the `Pending` is discarded)
`Canceled`	`Failed`	the `Failed` (the `Canceled` is discarded)

delay: the amount of time to sleep before retrying
blk: the block to execute and potentially retry

def withRetry(blk: => Outcome): Outcome

Retries the given block immediately (with no delay) if the Outcome of executing the block is either Failed or Canceled.

In the table below, if the “Retry Outcome” has just a dash, the block is not retried. Otherwise, the block is retried on the same thread, with no delay.

First `Outcome`	Retry `Outcome`	Result
`Failed`	`Succeeded`	`Canceled` (the `Succeeded` and `Failed` are discarded; the exception from the `Failed` is the cause of the exception in the `Canceled`)
`Canceled`	`Succeeded`	`Succeeded` (the `Canceled` is discarded)
`Succeeded`	—	`Succeeded` (no retry)
`Pending`	—	`Pending` (no retry)
`Failed`	`Failed`	the first `Failed` (the second `Failed` is discarded)
`Failed`	`Pending`	the `Failed` (the `Pending` is discarded)
`Failed`	`Canceled`	the `Failed` (the `Canceled` is discarded)
`Canceled`	`Canceled`	the first `Canceled` (the second `Canceled` is discarded)
`Canceled`	`Pending`	the `Canceled` (the `Pending` is discarded)
`Canceled`	`Failed`	the `Failed` (the `Canceled` is discarded)

blk: the block to execute and potentially retry

def withRetryOnCancel(delay: Span)(blk: => Outcome): Outcome

Retries the given block after the given delay if the Outcome of executing the block is Canceled.

The behavior of this method is defined in the table below. The first row shows the main "retry" behavior: if executing the block initially results in Canceled, and on retry it succeeds, the result is Succeeded. The purpose of this is to deal with tests that intermittently cancel by ignoring a cancelation that succeeds on retry.

In the table below, if the “Retry Outcome” has just a dash, the block is not retried. Otherwise, the block is retried on the same thread, after the given delay.

First `Outcome`	Retry `Outcome`	Result
`Canceled`	`Succeeded`	the `Succeeded` (the `Canceled` is discarded)
`Succeeded`	—	`Succeeded` (no retry)
`Pending`	—	`Pending` (no retry)
`Failed`	—	`Failed` (no retry)
`Canceled`	`Canceled`	the first `Canceled` (the second `Canceled` is discarded)
`Canceled`	`Pending`	the `Canceled` (the `Pending` is discarded)
`Canceled`	`Failed`	the `Failed` (the `Canceled` is discarded)

delay: the amount of time to sleep before retrying
blk: the block to execute and potentially retry

def withRetryOnCancel(blk: => Outcome): Outcome

Retries the given block immediately (with no delay) if the Outcome of executing the block is Canceled.

In the table below, if the “Retry Outcome” has just a dash, the block is not retried. Otherwise, the block is retried on the same thread, with no delay.

First `Outcome`	Retry `Outcome`	Result
`Canceled`	`Succeeded`	the `Succeeded` (the `Canceled` is discarded)
`Succeeded`	—	`Succeeded` (no retry)
`Pending`	—	`Pending` (no retry)
`Failed`	—	`Failed` (no retry)
`Canceled`	`Canceled`	the first `Canceled` (the second `Canceled` is discarded)
`Canceled`	`Pending`	the `Canceled` (the `Pending` is discarded)
`Canceled`	`Failed`	the `Failed` (the `Canceled` is discarded)

blk: the block to execute and potentially retry

def withRetryOnFailure(delay: Span)(blk: => Outcome): Outcome

Retries the given block immediately with the given delay if the Outcome of executing the block is Failed.

The behavior of this method is defined in the table below. The first row shows the main "retry" behavior: if executing the block initially fails, and on retry it succeeds, the result is Canceled. The purpose of this is to deal with "flickering" tests by downgrading a failure that succeeds on retry to a cancelation.

In the table below, if the “Retry Outcome” has just a dash, the block is not retried. Otherwise, the block is retried on the same thread, after the given delay.

First `Outcome`	Retry `Outcome`	Result
`Failed`	`Succeeded`	`Canceled` (the `Succeeded` and `Failed` are discarded; the exception from the `Failed` is the cause of the exception in the `Canceled`)
`Succeeded`	—	`Succeeded` (no retry)
`Pending`	—	`Pending` (no retry)
`Canceled`	—	the `Canceled` (no retry)
`Failed`	`Failed`	the first `Failed` (the second `Failed` is discarded)
`Failed`	`Pending`	the `Failed` (the `Pending` is discarded)
`Failed`	`Canceled`	the `Failed` (the `Canceled` is discarded)

delay: the amount of time to sleep before retrying
blk: the block to execute and potentially retry

def withRetryOnFailure(blk: => Outcome): Outcome

Retries the given block immediately (with no delay) if the Outcome of executing the block is Failed.

In the table below, if the “Retry Outcome” has just a dash, the block is not retried. Otherwise, the block is retried on the same thread, with no delay.

First `Outcome`	Retry `Outcome`	Result
`Failed`	`Succeeded`	`Canceled` (the `Succeeded` and `Failed` are discarded; the exception from the `Failed` is the cause of the exception in the `Canceled`)
`Succeeded`	—	`Succeeded` (no retry)
`Pending`	—	`Pending` (no retry)
`Canceled`	—	the `Canceled` (no retry)
`Failed`	`Failed`	the first `Failed` (the second `Failed` is discarded)
`Failed`	`Pending`	the `Failed` (the `Pending` is discarded)
`Failed`	`Canceled`	the `Failed` (the `Canceled` is discarded)

blk: the block to execute and potentially retry

Packages

Retries

Companion object Retries

trait Retries extends AnyRef

Value Members

Inherited from AnyRef

Inherited from Any

Ungrouped

Packages

Retries

Companion object Retries

trait Retries extends AnyRef

Value Members

Inherited from AnyRef

Inherited from Any

Ungrouped

Retries